Ima NOVIMAT/I/G80/440/R3

Edge banding machines
Technical data (subject to change):
Machine:
Constant workpiece projection from the chain conveyor: 38 mm (including edge with edge thicknesses of 0.3 - 3 mm)
min. passage width: 65 mm*
*at max. workpiece thickness of 25 mm
Min. workpiece length in feed direction: 150 mm
Basic height (upper edge of chain conveyor): 960 mm

Workpiece:
Minimum workpiece length: 150 mm
Minimum workpiece width: 65 mm
Minimum workpiece thickness: 8 mm
max. workpiece thickness: 40 mm (with copy function)
max. workpiece thickness: 60 mm (without copy function)
smallest workpiece: 150 mm x 150 mm, or
65mm x 300mm
Laterally protruding coating material: 0 mm
Edge material: paper, plastic and veneer
Minimum height: 14 mm
Max Height: 65mm
roll material:
Minimum thickness 0.3mm
max. thickness 3.0 mm*
*Veneer edges possible up to a maximum of 1.0 mm
maximum cross-section 130 mm²
minimum edge length 160 mm
max. upper edge overhang: 5 mm

Furnishing:
- Drive for throughput speeds of approx. 6 - 30 m/min., electronically adjustable (feed link chain with 80 mm wide plates)
- Top pressure with 70 mm wide V-belts
- Roller support rail, max distance from chain track approx. 500 mm
- Extraction requirement: air speed of min. 28 m/sec. (negative pressure 2480 Pa)
- Machine control ICOS open compact
- Horizontally adjustable, unheated stop ruler
- Extended machine infeed, consisting of:
* Adjustment axis for the infeed ruler
* Ruler extension with second adjustment unit
* Infeed device, 5 driven rollers, one can be folded up
* Novimat inlet extension by 540 mm for sliding chain G80
- Double milling unit; with 2 motors 4.5 Kw, 150 Hz, 9000 rpm with electronic positioning control. for stepless horiz. Adjustment, vertical adjustment with mechanical digital display, blow nozzle, etc. Removal of loose particles on the workpiece side and protective cover
- Gluing unit for straight edges and adhesive application to the workpiece.
The edge thickness max. 3 mm, glue specification for workpiece thickness max. 60 mm, pre-melting container approx. 1 1 with autom.
Granule feed and 2-fold edge magazine
- Snipping unit, pneum. swiveling 0+25°, 2 x 660 W
- Flush trimming unit above/below, 2 x 1000 W, with height sensing
- Multiple processing unit for chamfering or radius milling of the upper and lower longitudinal edges, as well as for copying the front and rear corners of the workpiece. With horizontal and vertical scanning and motorized horizontal positioning
- Profile scraper unit, with horizontal and vertical scanning, manually adjustable
- Scraper with electr. horizontal positioning
- Cleaning agent spray unit
- Buffing unit, 2 x 180 W, each individually adjustable vertically
- Slot milling unit 4.5 kW, with pneum. Operation control, manual 90° swivel device (180-270°) and suction hood