Used Plastic Machinery
9,946 resultsFind by category
Year : 1974 refurbished to servo in 2017/2018 Type of bag : Side seal bag Type of seal : Sideseal Max. seal Year(s) : 1974 Location : EUROPE (Western and Northern)
Price : On request
More detailsFly Knives 8 Bed Knives 2 Feed Opening 32" x 84" Screen Included Hours 80 Capacity 12,000 lbs/hr (estimate) Co Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTonnage 300 Type Upstroke Platen Size 1300mm deep x 3200mm wide Heating Hot Oil Daylight 3 x 120mm Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsStanford 142 doctor machine 30" web width 24" Diameter rolls 1000 feet per minute max speed. 250 pounds max r Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsVeco plan shredder Model 52/100 K Shorty Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEgan extrusion coating system Extrusion /Liquid coating .48 mil to 10 mil Rotogravure Aqueous and liquid coati Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsScrew diameter 190 mm Cascades / Sequential valve gates 8 Clamping force 30.000 kN Core pulls 2+2 (Pneumatic) Year(s) : 2015 Location : EUROPE (Western and Northern)
Price : On request
More detailsVICTORY VC 500 / 120 POWER Year(s) : 2011 Location : EUROPE (Western and Northern)
Price : On request
More detailsINJECTION UNIT SCREW DIAMETER: 45 MM STROKE VOLUME: 200 MM CM³ SCREW SPEED: 300 MIN⁻¹ CLAMPING UNIT CLAMPING Year(s) : 2020 Location : EUROPE (Western and Northern)
Price : On request
More detailsServo-hydraulic Shot size: 80.14 Oz Screw size: 85 mm Tie bar spacing: 33.07" x 32.68" Platen Size: 48.82" x 4 Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMEMBRANE DRYER 150# HOPPER DEWPOINT MONITOR, 220/1/60 Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMEMBRANE DRYER 60# HOPPER (NO LOADER) 230/1/60 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsType of delivery Bags on roll Type of handle No handle Type of sealing/bags Bottom weld Type of bags Bags on r Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsSHOT SIZE 232 oz. HKO Yes CORE PULL Yes CONTROLS Camac 486 Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsModel: ZE110Ax53D-UT Includes Control System 300 rpm screw speed; gearbox can be retrofitted with a higher sp Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsVOLTAGE 460/3/60 2 AEC SD-6.0.INS Drying Hoppers Year(s) : 2022 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand CDS Model CFK 3.5-SP Profile Size 4" Voltage 230V Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsThroughput Capacity 23 cfm Hopper Capacity(lbs) 33 Voltage 230/3/60 Approx. Dimensions (inches) 38x21x70 Tempe Year(s) : 2017 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsIt is a whole set, including a vacuum pump for transporting material and a conveyor. type E45.50 sequel Energ Year(s) : 2010 Location : EUROPE (Central and Eastern)
Price : On request
More detailsControll : CC300 Clamping force: 45 t Screw diameter: 30 mm Shot volume: 99 cm3 Type: Vertical Drive: Hydrauli Year(s) : 2018 Location : EUROPE (Central and Eastern)
Price : On request
More detailsCondition Excellent Clamping force: 360 tons Distance between tie bars: 820 x 820 mm Mould height : 250-860 mm Year(s) : 2013 Location : EUROPE (Central and Eastern)
Price : On request
More detailsWith a cutting chamber of 780 x 420 mm, equipped with a staggered closed rotor and a 75 HP (55.12 kW) water- Location : EUROPE (Western and Northern)
Price : On request
More detailsTo make bales, with manual tying, brand: Amadeo Farell, bale size: 650x400 mm, material entrance mouth: 800 Year(s) : 1992 Location : EUROPE (Western and Northern)
Price : On request
More detailsWith cutting chamber: 450 x 250 Open stepped rotor Motor: 10 HP (7.5 kW) With electrical panel Location : EUROPE (Western and Northern)
Price : On request
More detailsMotor: 10 HP (7.5 kW) Cutting chamber: 450 mm x 350 mm Others: With electrical panel Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsPlastics are polymerization products that can be formed into various shapes as needed when given pressure and heat.
There are also machines used to process plastics starting from plastic ore are: Single / twin screw extruder.
Machines used to mold plastics into a variety of common forms: injection molding, thermofoming, blow molding, etc.
Machines used to process plastics into special shapes: blown film, cast film, pipes and many more.
Majors brands such as Engel, Arburg, Krauss Maffei, Battenfeld, Demag, Nissei, Cincinnati, etc