Ima COMBIMA/II/650/A/R3

Double Edgebanders
Short Description:
Type of edging Thin edge, Thick edge
Gluing System EVA Hotmelt
Combination Squaring Edgebanding Machine First Pass
Max Panel Width 1300 mm
Max feed speed 50 m/min
Operating Units Right Side 11 nr
Operating Units Left Side 12 nr

Long Description :
Subfamily Double Edgebanders
Min. panel height 8 mm
Max. panel height 60 mm
Min. panel length 250 mm
Min. panel width 220 mm
Max. panel width 1300 mm
Min. edge thickness 0.3 mm
Max. edge thickness 3 mm
Max. forward feed speed 50 m/min

Top pressure
Pressure with rubber belt
Panel support guides with positioning by NC
No. Panel Sizing / Milling units Left Side 2

1
Unit miller hogger
automatic timed intervention with positioning by NC
motor power 8 KW
r.p.m. 7090 RPM

2
Unit double chipper, top and bottom with positioning by NC
motor power 12.5 KW
r.p.m. 5880 RPM
Same technical characteristics on the left side
Lamps to preheat the side of the panel
Edge coil magazine
no. positions 6

Gluing system
glue pot for EVA hot melt glue
premelter for EVA hot melt glue
Roller set to press the edge
no. pressure roller 5
with positioning by NC
No. Edge Processing Units 9

1
Processing Unit fine trimming to trim and round
no. motors 2
motor power 1 KW
r.p.m. 11430 RPM

2
Processing Unit fine trimming to trim and round
no. motors 2
motor power 1 KW
r.p.m. 11430 RPM

3
Processing Unit edge scraping

4
Processing Unit glue scraping

5
Processing Unit buffing
no. motors 2

6
Processing Unit belt sanding
no. motors 2

7
Processing Unit belt sanding
no. motors 2
motor power 0.75 KW
r.p.m. 1435 RPM

8
Processing Unit milling hogging
no. motors 1
with positioning by NC
motor power 7.5 KW
r.p.m. 2870 RPM

9
Processing Unit milling hogging
no. motors 1
with positioning by NC
Presence of spindle moulders on the left edging part
motor power 8 KW
r.p.m. 5880 RPM
Spray unit
Control system ICOS OPEN