Ima Novimat Contour/I/G80/790/L20

Single-sided edge banding machine
- Electronically controlled feed speed of 6-30m/min
- Roll edge in a thickness of 0.3 - 3.0 mm
- Paper, PVC and ABS edges 0.3 - 3.0 mm
- Veneer 0.5mm - 3.0 mm
- Wood slats 0.8 - 20 mm
- Edge height 14 mm - 65 mm
- Maximum edge allowance from above: for edge thickness up to 8 mm -5 mm over 8 mm -2 mm

Workpiece size:
- Minimum workpiece length in feed direction: 150 mm
- Minimum workpiece width 25 mm Thickness: 65 mm
- Minimum workpiece thickness: 8 mm (without profile scraper blades) or 12 mm with profile scraper blades
- Maximum workpiece thickness: Without corner copying Max. 60 mm (max. 40 mm with corner copying)
- Smallest element 150 mm x 150 mm or 65* mm x 300 mm
Note: *65 mm with a maximum piece thickness of 25 mm

The edge banding machine is equipped with:
- Hand-adjustable ruler for inserting workpieces
- Joint trimming 08.376 2 motors with 4.5 KW each, spindle speed 9000 rpm, 150 Hz
- Radiant heater for heating the workpieces
- Gluing unit with drive 283.1513 with a tightly sealed oil pan, arranged drive with glue pot capacity 0.8 l and glue application height 60 mm,
with pneumatic quick-clamping system for hotmelt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm
- Glue granulate preheating unit with automatic feeding of the glue granulate from a 30 kg container.
- Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and an output of 8-10 kg/h
- Cross-cut unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency converter and brake function
- Pre-milling unit 08.055, swivels up to max. 30°
- Multi-milling unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 rpm
- Detergent dispenser
- Profile scraper 08.519
- Flat scraper 08.521 for removing excess glue from glue joints
- Buffing unit 08.617-2, 2 motors with 180 KW, 50 Hz, 1400 rpm
- Grooving/milling unit with one motor