Ima Combima

Dimensions 2500 mm

Double sided sizing and edge processing machine
with angular transfer, length approx. 28,5m,
width approx. 12,0 m

- Processing of solid wood, veneered and melamine faced chip board possible
- Feed speed up to 28 m/min.
- Work piece sizes 260 – 2500 mm
- Work piece thickness 10 – 45 mm (possibly even thinner panels)

1. Feeding table with turning station

2. Combima I
- 2.1 Sizing section with controlled milling and double hogging station
- 2.2 Rebate – Milling unit with 2 motors, clock and counter clockwise rotation
- 2.3 Gluing part with 4 fold magazine
- 2.4 End trim unit
- 2.5 Flush trim unit
- 2.6 Chamfer trim unit
- 2.7 Multi-function milling unit
- 2.8 Profile scraping unit
. 2.9 Flat scraping unit
- 2.10 Grooving unit, below
- 2.11 Grooving unit with tracing
- 2.12 Grooving unit, lateral
- 2.13 Sanding unit, straight edge
- 2.14 Profile sanding Heesemann
- 2.15 Profile sanding Arminius
- 2.16 Profile sanding Arminius
- 2.17 Buffing unit

3. Double angular transfer

4. Combima II
- 4.1 Rebate – Milling unit with 2 motors, clock and counter clockwise rotation
- 4.2 Gluing part with 4 fold magazine
- 4.3 End trim unit
- 4.4 Flush trim unit
- 4.5 Chamfer trim unit
- 4.6 Multi-function milling unit
- 4.7 Profile scraping unit
- 4.8 Flat scraping unit
- 4.9 Grooving unit with tracing
- 4.10 Grooving unit, lateral
- 4.11 Sanding unit, straight edge
- 4.12 Profile sanding Heesemann
- 4.13 Profile sanding Arminius
- 4.14 Profile sanding Arminius
- 4.15 Buffing unit