Ima Combima Systems / I/R751220/R3

1 single-sided, combination machine for formatting, edge gluing and edge finishing
of panel-shaped workpieces made of wood and/or wood materials.

- Automatic feed table
- KFA unit
- Return

Technical data "workpiece":
Workpiece length
- min.: 238 mm
- max.: 2350 mm

Workpiece width
- min.: 142 mm
- max.: 800 mm

Workpiece thickness:
-min.: 8 - 40 mm

Technical data "strand" (longitudinal processing only):
Roll material:
- Paper edges & plastic edges: 0.3 - 3.0 mm
- Veneer edges: 0.5 - 3.0 mm

Edge height:
- min.: 14 mm
- max.: 45 mm

Technical data "machine":
Variable workpiece protrusion from the chain conveyor
(including edge with edge thickness 0.3- 3 mm):
- min.: 40 mm
- max.: 80 mm

-PC control ICOS open
- Feed speed v=5-25 m/min, frequency-controlled drive
- Inclined roller table as infeed section NC insertion system for front and body parts
- for automatic workpiece feeding independent of length and width on one-sided edge processing machines.

Only for the production of strand goods in the 2nd pass
- An additional stop ruler, adjustable via NC axis,

Double milling unit 08.376:
- Controllable
- Motor 1 works in synchronous rotation and motor 2 in counter-rotation
- Space reserve on the unit carrier for a double chipper with electrical pre-installation for 2 x 6.6 KW.
- Spotlight 300 lg, 2x1.5 kW, for preheating the workpiece edge.
- Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness is max. 3 mm, depending on the magazine used.
- Glue specification for workpiece thickness max. 50 mm
- 2 pre-melting containers for PU glue
- 12-compartment edge magazine for roll material 0.3-3 mm thick. (8 tracks up to 3 mm, 4 tracks up to 1.3 mm)

Vertical roll holder for 12 rolls:
- max. roll diameter 850 mm
- max. edge height 45 mm
- trimming unit 08.42, for 2 motors mounted on the top pressure
- pre- and milling unit with height control
- with 1 motor 1000 W
- multiple profile / chamfering unit, with 2 motors 1000 W
- contour milling unit KFA 30

- multiple profile scraper unit
- flat scraper 08.517
- copy buffing unit 08.604
- buffing unit 08.617-2
- double milling stand 75.184 1050 mm high, both sides of the stand can be used
- milling/profile milling/grooving unit 75.34 with 1 motor, without tools, 100 Hz, 6000 rpm
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm
- Motor shaft for use with the Hydro-Format tool system
- Return made by Meinert