Ima Advantage 60

Single-sided edge banding machine
Cutting area : 3200x 1300 mm
Table height : approx. 850 mm
Power : 7.5 KW
Saw blade : approx. 550 mm
StopMachine description

Technical data "workpiece":
Workpiece length min. 150 mm
Workpiece thickness min. 65*/ 150 mm
*with max. workpiece thickness of 25 mm
Workpiece thickness min. 8 mm
12 mm (with profile scraper)
max. 40 mm (with copy function)
60 mm (without copy function)

Smallest workpiece 65x300 / 150x150 x 19 mm
Machining allowance per workpiece edge 0 - 5 mm*
(*note max. machining cross-section)
Workpiece shape rectangular
Material chipboard, MDF
Surface material direct coating
(melamine resin paper)
Paper
Foil
Veneer
Laterally protruding coating material 0 mm
Technical data "edge material"

Roll material:
- Paper edges & plastic edges: 0.3 - 3.0 mm
- Veneer edges: 0.5 - 3.0 mm
max. edge cross-section 150-180 mm²

Cut edge strips:
- Strips 3.0 - 8.0 mm*
*(with change motor for MFA)
max. strip cross-section 520 mm²
Edge height
- min. 12 mm
- max. 65 mm
Max. upper edge overhang 2 mm
Edge profiles:
- Paper edge approx. 0.4 mm bevel 15°
- Plastic edge up to 3.0 mm radius depending on tool
- Flush milling of strips up to 8 mm

Technical data "Machine"
Constant workpiece projection 35 mm + edge thickness from the chain track
max. cross-section 520 mm²
Throughput width
min. (with projection 35 mm) 65 mm
Min. workpiece length in feed direction 150 mm
Basic height (top edge of chain track) 900 mm

Aggregate side: Left in feed direction
Pneumatic connection approx. 7 - 8 bar
Control voltage: 24 V DC / 230 V AC
The machine can only function properly electrically/electronically if the ambient temperature of the control cabinet is between +10 and +35 degrees C.

The basic machine consists of:
· Base frame with integrated electrical installation
· Drive for workpiece transport, Feed speed 16 m/min.
· Transport chain with 80 mm wide and 60 mm long chain plates
· Top pressure, equipped with: 2 rows of rubberized rollers,
electronic height adjustment of the
top pressure, workpiece thickness can be read via digital display
· Horizontally manually adjustable, unheated stop ruler
· User-friendly PC control with
- touch screen and graphic interface
- Simple, processing-related program creation
- Integrated PLC and electronic route control
- Program memory for up to 1000 programs
· Safety and protection devices in accordance with CE regulations.
· Sound-absorbing/protective hoods for cutting and milling units
· Support rail for wide workpieces, extendable by approx. 700 mm
· Incl. fastening material

Paint finish:
- Basic machine with hoods gray-white structure
- Units dust gray RAL 7037 structure and smooth
- Safety covers signal red RAL 3001
Cutting unit 08.415 for cutting the front and rear edge overhang, pneumatically pivotable to 0° or 8°,
with 2 motors 660 W, 400 V, 200 Hz, 12000 rpm, with 2 HM cutting saw blades 160 x 3.5 x 22, Z=36
including static frequency converter with electronic motor brake
· Multiple processing unit 08.346 for chamfering or radius milling of the upper
and lower longitudinal edge, as well as for copying the front and rear workpiece corners.
The horizontal and vertical unit movements are carried out pneumatically and by means of mechanical guides
With horizontal positioning on 2 fixed points for automatic adjustment between thin and thick edges
(Manually adjustable to one edge thickness each for thin and thick edges.)
With vertical positioning on 2 fixed points for automatic adjustment between finish milling and milling with overhang.
With horizontal and vertical scanning.
With manual motor positioning in X, Y and Z directions with mechanical digital displays.
2 motors 660 W, 400 V, 200 Hz, 12000 rpm, with HSK holder with quick-change device, without tools,
including frequency converter with braking function
For cross-pass (including copying function):
Workpiece thickness when corner copying 16-40 mm. min. workpiece length: 150 mm
min. distance between 2 workpieces: approx. 600 mm
max. working speed: approx. 16 m/min.
1 set of DP profile cutters I 80 x 12 x HSK25-R, Z=4, consisting of 1 left + 1 right tool (select radius)

· Space reserve for cleaning agent specification
· Profile scraper unit 08.519
For scraping an upper and lower milled
quarter-circle profile on glued-on plastic edges.
With pre-adjustable HM scraper tools for convenient
and quick changing. With horizontal and vertical
tactile feedback. With manual horizontal adjustment with
mechanical digital displays.
If the unit is not switched on, it is
pneumatically disengaged horizontally and vertically.
With individual suction nozzle and chip collection box

· Self-scanning scraper unit 08.50 for removing hot melt adhesive residue
from the edge area of ​​the top and bottom of the workpiece, controllable, with 2 cutting plates, with 2 air nozzles for blowing the scraper clean
· Chamfering/buffing unit 08.612, for cleaning the upper
and lower flush-milled edge material or for polishing thick edges,
pivotable around a vertical and horizontal axis with 2 motors 0.25 kW,
230/400V, 50 Hz, 1500 rpm, with 1 polishing disc each, diameter 40 x 200 x 18 pneumatic release device

· Space reserve for the installation of a smoothing unit or grooving unit 08.183 or sanding unit straight edge
IKL670006 1 piece
Mains voltage: 3/N/PE, 400/230 V, 50 Hz, with loadable neutral conductor
(FI protection circuit not applicable)
Electrical installation in accordance with EN
When ordering, the information in the electrical data sheet is decisive! Deviations must be offered separately. (additional charge)
(If this mains voltage cannot be maintained, an uninterruptible
power supply must be installed at the machine operator's expense)

IKL654393 1 piece
Machine labeling: German

IKL670180 1 piece
Spare parts catalog in German, English, French,
Spanish and Italian as a CD-ROM.
IKL670181 1 piece
OPERATING INSTRUCTIONS German
1 x in paper form + 1 CD-ROM
IKL659696 1 piece
ICOS open TS
Features:
- PC-based control system with integrated PLC and electronic path control
- User-friendly user interface
- Navigation and operation via touch screen
- Simple, processing-related program creation
- Program memory for max. 1000 programs
- Program name 3-digit numeric
- Fast data exchange between control and I/O components using EtherCat

Technical data:
Hardware*:
- Built-in panel PC, front protection class IP65 with integrated 12" TFT display, touch screen
- Fast EtherCat interface (field bus)

Software*:
- Operating system: Windows CE with system extension TwinCat PLC for real-time control
- PLC programming language: IEC 61131-3
* Hardware and software comply with always current state of our technology
Interventions in the machine control by unauthorized persons release IMA from the warranty obligation and from product liability.

IKL660810 1 pc
Language version German
Release agent indication at the top and bottom
IKL603801 1 pc
fixed, not adjustable
30 IKL658919 1 pc
Joint milling unit 08.376 for edge milling/calibrating formatted workpieces or for milling side grooves, folds or profiles, controllable, not swiveling, without touch, with 2 motors of 3.0 kW each, 12000 rpm, 200 Hz,
motor 1 working in synchronism and motor 2 in counter-rotation,
without profile tool, with 1 individual suction hood Ø 120 mm, with static frequency