Ima Advantage 3212, Edgebander

Route control;
upper clamp with rubberized rollers;
feed chain with lining (chain conveyor with a drive);
protective casings 1750… 2200 mm long;
emitter with a heating lamp, length 300 mm;
the unit for gluing the edge;
trimming unit;
finishing milling unit 08.055;
profile cycle 08.519;
flat scraper 08.50.
polishing unit 08.612.

Adhesive type - hot melt adhesive based on synthetic resins

Roll material diameter (max), mm 860
Workpiece passage speed, m / min 12
Edge height, mm 14 ... 65
Edge thickness, mm 0.4 ... 12
Plate thickness, mm
minimal
maximum with copier
maximum without copier
8
40
60
Slab width (min), mm
(with a minimum length of 300mm)
60
Slab length (min), mm
(with a minimum width of 120mm) 150
Edge section (max), mm
reiki
PVX
12 x 55
3 x 55
Plate protrusion for the chain, mm 40
Compressed air pressure 6 bar
Aspiration 28 m / s