Used Tenoner, Notches, Router, Jointer, Milling and Others

SECOND-HAND ROUND END TENONER - CE RULES kw 3.75 volt. 380/50 Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Equipment: P10 - Bj 1994 Saw unit with block separator and open floor Groove milling machine with right/left m Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Hourly Production: 600/700 Tenons Tenon Width: Max. 100 mm + Thickness Tenon Thickness: Max. 30 mm Tenon Depth Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Electric raise & lower shaft tiltable in both directions, electric rotation of the shaft right or left interch Location : EUROPE (Western and Northern)

Price : On request

298.3 “engine” hours and around 500 M3 to his credit. Maintained and cleaned after each construction site, lub Location : EUROPE (Western and Northern)

Price : On request

Table milling machine FORMAT4 profile F45 - Used machine - Spindle swivels: 45° - Spindle adjustment electrica Location : EUROPE (Western and Northern)

Price : On request

Location : EUROPE (Western and Northern)

Price : On request

Consists of : 1 under-table swivel cross-cut saw 1 Kerven tenon cutter 1 overlay tenon cutter 1 vertical drill Location : EUROPE (Western and Northern)

Price : On request

Consisting of: Infeed conveyor Turntable Milling Machine With Chipper Dovetail cutter Edge saw above and below Location : EUROPE (Western and Northern)

Price : On request

Working width max mm: 3,000 Working width min mm: 200 Passage height max mm: 180 Feed max m / min: 24 Infinite Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Working width: 3000 mm Passage height: 180 mm 2 x 7.5 kW motors on each side Shaft diameter 30 mm Location : EUROPE (Western and Northern)

Price : On request

4FT X 10FT CNC ROUTER (440/60/3 electrics) Location : AMERICA North (USA-Canada-Mexico)

Price : On request

With measures of 1000 mm by 790 mm, the machine has a power of 7.5 CV, and a voltage of 380 V. Totally revis Location : EUROPE (Western and Northern)

Price : On request

Hourly Production: 600/700 Tenons Tenon Width: Max. 100 mm + Thickness Tenon Thickness: Max. 30 mm Tenon Depth Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Ø saw blade: mm 250 Milling unit - shaft diameter: mm 35 Height of the tenoning shaft: mm 150 Manual guide car Location : EUROPE (Western and Northern)

Price : On request

Machine like new, barely used. Location : EUROPE (Western and Northern)

Price : On request

Good condition Sold with tenoning and profiling tools (LEITZ) for wood joinery thickness 68mm Location : EUROPE (Western and Northern)

Price : On request

Pouwels def50 router In excellent working condition Location : EUROPE (Western and Northern)

Price : On request

This unit came out of a working plant. You can purchase it either as it is, or "cleaned, checked, and tested" Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Manual height and swivel adjustment electric speed display Table size 760 x 1,100 mm Swivel range -5° to +45° Year(s) : 1992 Location : EUROPE (Western and Northern)

Price : On request

CE standard automatic loader No. 2 heads with A and B rotating axes (both +/- 60°) electrospindles 8 kw and 5 Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

CE standard automatic loader No. 11 axes controlled No. 2 heads with electrospindle 8hp each man tenon width 1 Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

D.35 5.5HP 380V Location : EUROPE (Western and Northern)

Price : On request

Table height constant approx. 750 mm - Circular cross-cut saw 4 kW, 1500 rpm Shaft diameter 40 mm Cutting hei Location : EUROPE (Western and Northern)

Price : On request