Used Spinning machines (Open End)
243 resultsRotors/Spindle qty:400 Rotor Type : C533/U-D Navels: Ceramic R7 Opening roller : B174 Yarn cleaner: No Waxing Year(s) : 2013 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsType Aco 288 1 year 1994 2 year 1995 1 year 1996 264 spindles / machine waxing device 3 machines with opening Year(s) : 1994, 1995, 1996 Location : EUROPE (Western and Northern)
Price : On request
More details1 set Year 2012/ 2 sets Year 2013 400 spindle Rotor U33 With Rieter original cleaner Carding stick OK40 R Year(s) : 2012, 2013 Location : -
Price : On request
More details456 Rotors SE12 Spin boxes 4 piecers Corolab Yarn Cleaners Waxing Tube Take up 31/33mm Rotor Diameter Year 20 Year(s) : 2007, 2009, 2010 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsr. 1 Open End RIETER BT-905 Year 2001 160 Positions Waxing Rotor 48 mm Opening rollers for mixing Exit 6" 2 Year(s) : 1996, 2001 Location : EUROPE (Western and Northern)
Price : On request
More detailsRIETER BT 905 (2 Sold - 1 Available) 192 Rotors Rotor 40-48 mm. Exit 6” 2 X 4º 20’ – 1 X 1º 51’ Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More details192 Rotors Waxing Device Exit 6'' 4º 20' Special for Thick Titles BT-902 can do 8Nm – 20Nm Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsO.E spinning frame, 56 rotors, 110 Mm rotor, 8 sections of 7 positions each. 1-RANGE OF COUNTS: Nm 0.8-12 2- Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details320 rotors 2 robots 33-XT5-B-AE rotors Air cradle B 174 DN 64 openers Uster Quantum 2 clearers parafine Kni Year(s) : 2004 Location : MIDDLE EAST
Price : On request
More detailsELITEX BD 200 RN No. Of Rotors: 200 Rotor Dia: 54 MM No Of Machines Available: 16 Wire: OK 40 Running In Cotto Location : ASIA (South)
Price : On request
More details2 sets Used Schlafhorst BD 320 year 2007 288 rotors each machine chesse Length 170 mm, 34 mm rotors one machin Year(s) : 2007 Location : ASIA (South)
Price : On request
More detailsBobbin/Cheese length : 98 mm. Rotor diameter : 53 mm Spin Rotor: 200 heads each machine Power supply : 380V Year(s) : 1988, 1989 Location : ASIA (South East)
Price : On request
More detailsNos. 216 Rotor , MULTILOT 5 108 Rotor whit waxer and 108 whitout waxer Rotor T640 or T634 Opening rollers B174 Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More details– Automatic – 200 spindles (with a lot of spare parts) – Cone outlet 6”x2º – 2 robots – Electronic steam trap Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More details192 rotors each good working condition with OHTC for sale. rotor size -54mm & 63mm. clearer – No Year(s) : 1993 Location : ASIA (South)
Price : On request
More detailsNos. 288 spindles No. 4 Coromat Opening rollers OB20 DN Rotors diameter 46 mm Exit cone 6'' Cylindrical Waxer Year(s) : 2009 Location : EUROPE (Western and Northern)
Price : On request
More detailsAvailable end 2022 early 2023, machines with 480 spindles Rotor type T536BD KSS-A opening roller type B174DN C Year(s) : 2012, 2013 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsModel ACO 288 Type SRK 240 Positions Feeding cans 500 mm. x 1160 mm without wheels Nozle KN4 Rotors T 231 BD Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsModel ACO 288 Type SRK 216 Positions Feeding cans 500 mm. x 1160 mm without wheels Nozle KN4 Rotors T 233 BD Year(s) : 1995, 1996, 1997 Location : EUROPE (Western and Northern)
Price : On request
More details3x Schlafhorst Autocoro ACO312 Open End Spinning Frames, 2003 312 rotors SE11 Spinboxes rotor type T533BD open Year(s) : 1998, 2000, 2003 Location : EUROPE (Western and Northern)
Price : On request
More details312 Rotors Each, T331 Rotor type B174 DN Clothing ring KN-4 Navel Corolab 7 Clearer 2 Coromats each machine NE Year(s) : 2002 Location : ASIA (South)
Price : On request
More detailsDRUM 280 ROTOR 35 MM NOVEL SPIRAL CLOTHING RING 174DN ROBOT - 2. Machine Right Now Stop No video Year(s) : 2001 Location : ASIA (South)
Price : On request
More detailsMachines are stop on mill floor and in very good condition. Number of rotors is 240 and diameter is 31. There Year(s) : 1995 Location : MIDDLE EAST
Price : On request
More details360 spindles rotor dia T33BD 7 sets rotor dia T408BD 1 sets opening roller type 174DN Flat tube corolab clea Year(s) : 2007 Location : ASIA (China - Taiwan - HKG)
Price : On request
More details540 SPINDLE 4 ROBOTS FOREIGN FIBER DETECTOR 74 DCN ROTOR DIA 31 EX COTTON Year(s) : 2014 Location : -
Price : On request
More detailsYou can find used Open End Spinning machines on Wotol
The main manufacturers of Spinning machines (Open End) are Schlafhorst, Rieter, Elitex, Saurer, Trützschler, Savio, Hdb, Ingolstadt, Muratec, Titan, Zinser.
You will find ACO Autocoro SE9, SE10, SE11, SE12, R60, R40, R20, BT903, BT905, BT923, BD200
Open-end spinning is cleaper spinning method where the yarn is twisted by rotating at the hap or break in the flow (the fibers wrap around the yarn vs spinning one long piece of yarn). Open end spinning offerd higher poductivity and less processed than ring spinning method but it gives products with a lower quality with frayed texture and poorer wear resistance. It is also called break spinning or rotor spinning.
Open end technology has been developped in the 30's. Elitex from CZ has developped the first rotor spinning machine running at 30000 rpm with its very well known BD200 model in 1965. The speed has increased rapidely at 100,000 rpm in the mid 70s. Noadays Open End is widely spred as a mass production spinning method.
Questions and answer corner from users
Q: Schlaforst ACO seems to be a very known machine for open-end. I have seen a complete mill with various models. Can you explain the difference?
A: There are 18 SE-9 168 unit frames - non Amsler equipped- 10 with 46 mm rotor and 8 with 40 mm rotor .
There are 10 SE-9 240 unit frames - 9, equipped with Amsler units- 46 mm rotor.
There are 8 SE-10 240 unit frames - non Amsler- 40 mm rotor.
We have enough of the 46 and 40 mm rotors to change them as styles dictated. All the 40 mm rotors are TT grove that we used in filling.
All the 46 mm rotors are U groove that we used in the Warp yarn frames.
There is an extra set of 46 mm TT rotors that we used in the 25P/75C mix- 240 rotors.
All frames have B174 combing rolls ( 100% ) but we have OS21 rings for combination poly/cotton yarns.
The 168 unit frames are 80' in length.
The 240 unit frames are 107' in length ( except Amsler frames, they are 109' because of Amsler control box mounted on top)
The SE10 240 unit frames are 108' in length.
All frames have 2 piecers ( robots ).
No frames have waxing devices.
SE-9 Rotor drive has a 23 kw on 1 end and 35 kw on the other end.
SE-10 Rotor Drive has a 35 kw on both ends.
Combing roll drive motor is 17 kw on both frame types.
All frames have Uster UPG Polyguard clearers.
Q: I want to buy some Schlafhorst SE9, SE10 Open end with 288 spindles how many containers do I need and how do you load the machines?
A: For one Schlafhorst SE9, SE10 Open end with 288 spindles you will need 2 complete 40FT high cube containers. The fees of the sections will be removed and the open end sections will be secured on special palettes made for this purpose. On section of open end will be on top of the other will be held by a metal frame to avoid any damage. We usually have these farmes made for few hundred dollars each.
Q: I have some questions about your used Schlafhorst Autocoro 8 Open end spinning machines from 2012 with 480 spindle:
What is the running count and rotor speed?
A : We are producing from 7s to 32s on these ACO8.
machine is running 12000 ~ 14000 ,It is up to count; but this machine can run much faster ; wewant to produce high quality ; that is why we run lower speed.
Q: Also please confirm the availability of Synchropiecing.
A : Yes ACO8 No 2 is 12 spindles ,the rest is 6 spindles
Q: What is the the feed can diameter
A : Can diameter 1100 X 500mm
Q: What is the machine length for 480 Rotor machine ?
A : Complete lenght on the mill floor is : 60790mm
Q: What yarn count can produce a usd Rieter BT 902 open end spinning machine with Exit 6'' 4º 20' ?
A : This Rieter BT-902 can do 8Nm – 20Nm.