Waldrich Coburg S 22-10 GM 500 CN16 M Variable

WALDRICH COBURG S 22-10 GM 500 CN16 M
CNC GANTRY TYPE MILLING MACHINE



Siemens 840D control
OPO15 with 15“ TFT monitor
PCU 050
Machine control panel
USP interface to transfer NC programs
NCU 573.X
Profibus connection
Measurement cycles (Siemens standard)
Technology cycles (Siemens standard)
Hand controller with 10 m cable
Teleservice package
Siemens option DNCMachine and ethernet Interface
New control panel Siemens 840D
NC components für Siemens 840D
New electrical cabinet and new electric installation
The new control cabinet with the corresponding drive components (power units, controls, feedback feed unit, mains filter), bus components, machine switch and the part for the PLC is renewed.)
The control cabinet is equipped with a door mounted cooling unit completely fitted.
New protective cabled for feed motors and spindle motor.
New cables for the measuring systems.
New cable carrier chains including installation for X,Y,Z Axes.
New control cables and installation of peripherals
New supply lines for auxiliary units
Complete milling support installation
Renishaw cable A-4113-0304 (2 x 50 m)
DNC machine connection cable up to the electrical cabinet (foundation)
Renishaw System installed

 
Siemens 840D CNC Control
(11) Eleven Milling Heads/Attachments are Included – 


Angle milling head 40 KW
WFU 500 SZ
ISO 60 – 600 rpm – 90°
Angle milling head 30 KW
SSF 250 B
600 rpm
Angle milling head 12 KW
EFK 40 E
750 rpm
Eccentric milling head
VV 250 E
475 rpm
Angle milling head
EFK 250 SZ
ISO 50 – 750 rpm
Universal milling head 30 KW
UFDH 250 SZ
360° – 750 rpm
Extension 35 KW
ISO 50 – 750 rpm
High speed spindle 18 KW
SLA 23 SZ
ISO 50 – 2,250 rpm
Angle head 150 KW
WFU 2100 SZ
ISO 60 – 475 rpm

(1) One Milling Support Mounted on Crossrail
Automatic Clamping of Tools & Milling Heads
Hydrostatic Drive Screws for the Gantry Travel
Synchronized Control for the Gantry Movement
Hydrostatic slides for the gantry and for the milling support cross travel
Automatic Crossrail adjustment
Automatic clamping and lubrication of all axes
Ballscrews for the movement of the milling ram, the Crossrail, and the horizontal travel of the milling saddle
Feeds, rapids and creep feed for all axes
Steel covers for the guideways of the bed, the Crossrail and the side columns
Concertina covers for the column slides above the Crossrail
Platform carts to transport the milling heads to the change position
Guideways on the Bed slides to transport the platform cars
Complete electrical supply
Operator central with motorized horizontal and vertical displacement
Hand Control Unit
Overload safety system for Milling ram and milling heads.
Measuring system for the CNC unit:
Rotary encoder for the Gantry
Linear scales for all other axes
Adaptor SVS-SZ to reduce the spindle taper ISO 60 to ISO 50
Coolant unit. Supply at the milling ram 80 l/min at 10 bar
Internal coolant through the milling spindle 40 l/mi. at 3 bar
Internal coolant to supply coolant to the milling heads, 30 l/min at 3 bar
Chip conveyor. Usable width 300 mm. Right side / Left side

Specifications
Convert to US
Table Size
15,000 x 5,000 mm
Table Load Max
15,000 kg/m²
Distance Between Columns:
With Column Covers
5,800 mm
Without Column Covers
6,000 mm
Distance Spindle to Table Max
5,000 mm

TRAVELS:
X Axis Gantry Longitudinal Travel
16,000 mm
Y Axis Saddle Cross Travel
6,800 mm
Z Axis Milling Ram Vertical Travel
2,000 mm
W Axis Crossrail Vertical Travel
3,400 mm

CUTTING FEEDRATE:
X / Y Axis
1 - 10,000 mm/min
Z Axis
1 - 3,000 mm/min
W Axis
1 - 2,000 mm/min

SPINDLE:
Milling Spindle Diameter Front
200 mm
Spindle Motor Rating
150 kW
Spindle Speed Range
6 - 750 rpm
Gear Steps
2
Torque Max
12900 Nm
Spindle Taper
ISO 60
Ram Section
630 x 680 mm
ELECTRICAL:
Electrical Connection
460 kVA
Max Installed Power
380 kVA
Average Power
370 kVA