Waldrich Coburg POWERTEC 4000 AP 2500 /min 200 mm

WALDRICH COBURG POWERTEC 4000 AP
Year of construction: 1995

w.range
X 14000 mm
Y 5000 mm
Z 1500 mm

Table
length 9000 mm
width 3000 mm
max power 113 kW
rev.max 2500 /min

Working Range -milling-
x-axis traverse 14000 mm
y-axis traverse 5000 mm
z-axis traverse 1500 mm
w-axis traverse 3000 mm

Portal / Bridge
Passage height 4500 mm
distance between columns 4000 mm

Table
clamping surface (left-right) 9000 mm
clamping surface (front-back) 3000 mm
workpiece load (max) 100000 kg

working spindle / head
spindle type vertical
spindle revolutions (min) 2 /min
spindle revolutions (max) 2500 /min
number of gears 2
spindle diameter 200 mm
taper fixture ISO SK 50
drive power (max) 113 kW
spindle power (continuous) 106 kW
torque (max.) 9500 Nm

Axis drives
traverse velocity x (min) 1 mm/min
traverse velocity x (max) 10000 mm/min
traverse velocity y (min) 1 mm/min
traverse velocity y (max) 10000 mm/min
traverse velocity z (min) 1 mm/min
traverse velocity z (max) 10000 mm/min
feed velocity w (min) 1 mm/min
feed velocity w (max) 2000 mm/min
rapid traverse x 20000 mm/min
rapid traverse y 20000 mm/min
rapid traverse z 20000 mm/min
rapid traverse w 2000 mm/min

Electrical specifications
mains voltage 400 V
mains frequency 50 Hz
Dimensions / weightsheight above floor level 8590 mm
total weight approx. 360000 kg

attachments
angular milling head yes
autom. tool clamping yes
ball spindles yes
guideway covers yes
coolant unit yes
high pressure cooling syst. (through spindle) yes
closed cabin yes
chip conveyor yes

Description of condition
both identical machines are retrofitted by WALDRICH COBURG in 2011.
The x travel was extended to totally 14.000 mm.
A pallet changing system was installed.
Both machines are under power and can be inspected by appointment.

PLANER TYPE MACHINING CENTER WITH 2 PALLETS 9000 x 3000 mm:
- Tool changer with 420 tools
- Head pick-up system
- Video monitoring via camera
- High pressure lubrication unit for inner cooling 70bar

AVAILABLE HEADUNITS:
- Fixed angle head HS800C600 105 kW 600 long
- Fixed angle head HSD350C850 50 kW 850 long
- Fixed angle head HSD 40C880 12 kW 880 long
- Fixed angle head HSD 190C1000 30 kW 1000 long
- Vertical spindle unit VS800C 105 kW 900 long
- Universal spindle unit USIO40C 20 kW B-axis rotatable at 1° at a time
- Angle spindle unit SO800C905 - 22,5° fix
- Angle spindle unit HSE1200CS -25° fix
- Universal spindle unit (fork milling) USP475C 75 kW 1/2° Hirth