Toshiba BTD-110H.R13 HBM SIZE 4.3″ Dia Spindle 3,000 RPM

Toshiba BTD-110H.R13 HBM
2013

SIZE 4.3″ Dia Spindle
SPINDLE SIZE 4.3″
X-HORIZ TVL OF TABLE 63″
Y-VERT TVL OF HEAD 49.2″
POWER 60 hp
RPM 3,000 RPM
TABLE-W 44.1″
TABLE-L 49.2″
SPINDLE TVL. 44″
CONTROL CNC (Tosnuc 999)

Travel
X-axis travel (Cross movement of table) mm (in) 1 600 (63)
Y-axis travel (Vertical movement of spindle head) mm (in) 1 250(49.2)
Z-axis travel (Longitudinal movement of table) mm (in) 1 130 (44.5)
W-axis travel (Spindle extension) mm (in) 500 (19.7)
Distance from table surface to spindle center mm (in) 0~1 250 (0~49.2)
Distance from table center to milling spindle gauge plane mm (in) 410~1 540 (16.1~60.6)
Table
Table working surface mm (in) 1 120 x 1 250 (44.1 x 49.2)
Table loading capacity kg (lbs) 4 000 (8 800)
Table surface configuration (Pitch of T-slots 160 mm, size 22 mm) 7 T-slots 9 T-slots
Minimum table indexing angle (B-axis) degrees 0.0001
Spindle
Spindle diameter mm (in) 110 (4.3)
Spindle speed range min-1 5~3 000
Milling spindle nose diameter mm (in) 225 (8.9)
Type of spindle taper No.50
Feedrate
Rapid traverse rate X, Y, Z mm/min (ipm) 12 000 (472.4)
W mm/min (ipm) 5 000 (196.9)
B deg/min 720
Feedrate X, Y, Z mm/min (ipm) 1 ~ 6 000 (0.04 ~ 236.2)
Automatic tool changer
Type of tool shank 50
Type of retention knob 50T-1 (45 degree)
Tool storage capacity 38
Maximum tool diameter When adjacent pots are filled mm (in) 125 (4.9)
When adjacent pots are empty mm (in) 240 (9.4)/T type bar ø400 (15.7)
Maximum tool length mm (in) 400 (15.7)
Maximum tool mass kg (lbs) 25 (55)
Tool selection Pot address random short-cut
Spindle drive motor
(30 min./cont. rating) kW (HP) AC15/11 (20/15)
{AC22/18.5, AC30/22 (AC30/25, AC40/30)}
Power source
Electric power supply AC200/220V +/-10%, 50/60Hz +/-2%
Power Capacity kVA 47 {58, 64}
Compressed air supply Pressure MPa (psi) 0.5 ~ 0.8 (72.5 ~ 116)
Flowrate Nl(gal)/min 500 (132)
Machine size
Machine height mm (in) 3 750(147.6)
Floor space mm (in) 5 050 x 5 470 (198.8 x 215.4) 5 130 x 6 560
Mass of machine (including NC equipment) kg (lbs) 22 000 (48 400)
Accuracy
Positioning accuracy X, Y, Z mm/min +/-0.005 (0.0002)/full length
W +/-0.010 (0.00039)/full length
Repeatability X, Y, Z +/-0.003 (0.00012)
W +/-0.008 (0.00031)
Table indexing accuracy (arbitrary angle) sec +/-3
Table indexing repeatability (arbitrary angle) sec +/-1.5
Machine colour
R4-383 (Munsell 5Y8.4/0.5) and N2.5
For the NC system, servo motors and cooler, each maker’s standard colour shall apply