Karl Suss, Suss MicroTec MJB3 Mask Aligner (350W)

SUSS MJB3 MASK ALIGNER consisting of:
- Model: MJB3 Main System
- Configured for Top Side Alignment
- Max Wafer Size: 3" Diameter
- CIC 500 Power Supply
- 350 Watt Lamphouse
- UV400 Exposure Optics (for 365nm and 405nm exposure)
- Suss M230 Splitfield Microscope
- Eyepieces: 10x
- Objectives: 3.5x and 10x
- Exposure Mode: Vacuum Contact, Hard & Soft
- Light Source for Microscope
- Exposure Resolution: 0.8 Microns (under optimum conditions)
- Alignment Resolution: 0.25um (operator dependant)
- 1 Maskholder included (for 4"x4" masks)
- 1 Wafer Chuck included (specify size, many in stock)
- Brand New 350W Bulb, qty. 1 included
- Operations Manual for Suss MJB3 Mask Aligner
- Refurbished by Former Suss factory Trained Technicians to Meet Original Suss MJB3 Specifications!

CLASSONE'S MASK ALIGNER REFURBISHMENT PROCESS consists of:
1) Main System Body:
- Ellipsoidal Mirror Replaced with New
- UV Bulb Replaced with New
- Cold Light Mirror Inspected & Replaced as Needed
- Front Turning Mirror Inspected & Replaced as Needed
- Front Lens Inspected & Replaced as Needed
- Shutter Cylinders Replaced with New
- Mirror House Cylinder Replaced with New
- Lamp Power Supply Tested & Repaired or Replaced as Needed
- Exposure Optics Tested
- Microscope Illumination Bulbs Replaced with New
- Microscope Assembly Inspected and Adjusted as Needed
- Full Optical Alignment of Microscope Performed as Needed
- Machine is Fully Tested to Verify Compliance to Original Specifications
- WEC Head Rebuilt
- Pneumatic Regulators Inspected & Replaced as Needed
- Machine Covers are Repainted or Replaced as Needed

2) Isolation Table:
- Isolation Table Air Bags Inspected & Replaced as Needed
- Pneumatic Regulators Inspected & Replaced as Needed
- Air lines Inspected & Replaced as Needed
- Wheels Inspected & Replaced as Needed
- Leveling Feet Inspected & Replaced as Needed

3) If Applicable:
- Transport Slide Rebuilt
- Pre-Aligner Assembly Rebuilt
- Wafer Alignment Stage Rebuilt
- Cassette Elevator Rebuilt

INSTALLATION AND SUPPORT WORLDWIDE OF SUSS MASK ALIGNERS:
- ClassOne Supports all its Used and
Refurbished Suss Mask Aligners with
Spare Parts and Service Worldwide
- Installation & Training Available Worldwide

CONDITION:
Excellent Condition Guaranteed.
Fully Refurbished to Factory Specifications by ClassOne.
6 Month Warranty and Full Specifications Guarantee.
30 Day Right of Return.