Suga S80 Test Instruments Sunshine Weather
ASIA (North East)
Specification
Light source: Sunshine long life carbon arc lamp
Continuous lighting time: Approximately 78 hours
Discharge voltage/current: 50V±2V, 60A±2A
Carbon: Upper SLEM-U type, approximately Φ36 x L410mm,
4 pieces
Lower part SLEM-L type, approx. Φ23 x L410mm, 4 pieces
Glass filter: 8 pieces made of heat-resistant optical glass,
approximately width 164 x length 303 x thickness 2.5 mm
Discharge current adjustment method: Automatic control method using servo amplifier
Irradiance: 255W/m2±10%
●Test items
① Irradiation test (dry bulb temperature control)
② Irradiation + surface spray (rainfall) test *No temperature/humidity control
*Cycle testing for each test is possible.
●Temperature and humidity range (during irradiation)
Black panel temperature (BPT): 63±3℃
Humidity: 30-70±5% rh *At black panel temperature 63℃
Tank temperature: no control
●Sample rotation frame
Sample rotation frame diameter: 960±6mm
Sample holder: Vertical type 38 pieces, 70 x 150 mm
Number of samples attached: 76
Rotation speed: 1rpm
Test tank: approx. W1060 x D1060 x H950mm
External dimensions: approx. W1360 x D1450 x H2260mm
Weight: approx. 560kg
Power supply: 3-phase AC200V 50Hz MAX 39A
(main power supply 50A earth leakage breaker)
Required water pressure: Minimum 0.1Mpa, maximum 0.2Mpa *If the pressure is 0.2Mpa or more, please install a pressure reducing valve.
Required water amount: Approximately 0.5L/H for wet bulb pot (tap water)
For sample spraying Approx. 25L/H (pure water)
*When spraying for 12 minutes out of 60 minutes, per cycle
Approximately 38L/H (pure water)
*When spraying for 18 minutes out of 120 minutes, per cycle
For humidity generator Approx. 7L/H
Device status
Comes with instruction manual,
sample holder, glass filter, etc.
No power cable.