Stork 230 Cm Complete Coating Range

STORK COMPLETE COATING RANGE FOR VINYL or other products
MAKER: STORK
WEB WIDTH: 2340mm
YEAR 1995
VINYL COATING RANGE 2400 mm” WIDE FOR UP TO 2340 mm WEB

CONSISTING OF:
A. DUAL A-FRAME LET-OFF STATIONS WITH OVERHEAD CRANE TO DELIVER/REMOVE ROLLS
B. ACCUMULATOR WITH 9-UP AND 10-DOWN (SOME ROLLS REMOVED)
C. PRE-CONDITIONER, WITH TWO 2400 mm X 610 mm CYLINDERS, ONE HEATING AND ONE COOLING
D. E&L PIVOT GUIDER (STATIONED OVER THE PRE-CONDITIONER)
E. STORK X-CELL 2-COLOR SCREEN COATING STATION
F. INFRARED DRYER ON GANTRY ABOVE STORK
G. BETA GAUGE
H. PRE-HEATER MOUNTED OVER EMBOSSER
I. STORK HORIZONTAL EMBOSSER (RUBBER ROLLS)
J. STORK X-CELL 2-COLOR SCREEN COATING STATION
K. INFRARED DRYER MOUNTED ABOVE STORK
L. OPERATOR PLATFORM
M. KNIFE-COATER – NOT AVAILABLE (but can be replaced from stock upon request)
N. BETA GAUGE
O. SABEN S.A. BENGUEREL HORIZONTAL CLIP TENTER FRAME, 2400 mm MAX. OPENING WITH 3-METER ENTERING SWING RAIL
P. SABEN GAS FIRED 10-ZONE HOUSE 16.500 mm LONG, 10-ECLIPSE 500,000 BTU/HR. BURNERS AND 10-CIRCULATION FANS,
Q. SABEN EXIT SECTION 3-METERS LONG
R. STORK HORIZONTAL EMBOSSER (RUBBER ROLLS)
S. (2) 610 mm DIA. CHILL ROLLS WITH 152 mm NIP/DRAW ROLLS
T. ACCUMULATOR, 3-ROLLS UP AND 4-ROLLS DOWN
U. E&L PIVOT GUIDER MOUNTED FREE-STANDING
V. DRAW-ROLL SET
W. INSPECTION STATION FOR FRONT-AND-BACK LIGHTED VIEWING
X. DUAL CENTER-WIND TAKE-UP STATIONS EACH WITH SINGLE ARBOR CHUCKED WINDER DRIVEN BY A-FRAME CENTER DRIVE
Y. DRIVE AND CONTROLS CABINET

RANGE IS IN EXCELLENT CONDITION AND CAN BE PURCHASED WHOLE
(WITH EXCEPTION OF KNIFE-COATER ITEM M).
THE WIDEST MATERIALS PRODUCED ON THIS RANGE WERE 2340 mm WIDE.
MANY OVERHEAD MOUNTED IDLER ROLLS ARE BORED AND CHILLED.
THERE IS A LARGE STORE OF SPARE PARTS FOR THE RANGE.