Used Coating Machine

Dipping or Licking unit. For PVC / PVA and Bitumen coating. Infra Red Dryer. Capacity for 2x6 heating tubes wi Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

Roller Width 2.200 mm. Diameter 260 mm. Composed of 2 Rollers in Vertical position. Impregnating cylinder rect Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request

For water and resin processing Input, 1st coating blade, 1st oven. Oven Exit, 2nd coating blade, 2nd oven. Ove Year(s) : 1987 Location : EUROPE (Western and Northern)

Price : On request

UNITECH COATING RANGE, WW 2850 MM YEAR 2003 UNI TECH - SANTA LUCIA STENTER FINISHING & COATING LINE BIANCO ENT Year(s) : 1982, 1995, 2003, 2007, 2010, 2016 Location : EUROPE (Western and Northern)

Price : On request

WORKING WIDTH 2200MM ENTRY WITH MAHLO WEFT STRAIGHTENER TYPE RCMC9 ISOTEX COATING HEAD KNIFE OVER ROLLER KNI Location : EUROPE (Western and Northern)

Price : On request

UNWIND FROM A FRAME ENTRY CENTERING GUIDING UNWIND DRIVE BABCOCK 2 BOWL HORIZONTAL IMPREGNATION PAD MANGLE MA Year(s) : 1982 Location : EUROPE (Western and Northern)

Price : On request

UNWIND FROM A FRAME DRIVEN ENTRY ROLLERS WITH E+L ENTRY CENTERING/ SCROLL ASSSEMBLY SECTION 2 DRIVEN SCROLL R Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

BIANCO ENTRY DOGAL CENTERING/ SCROLL ASSSEMBLY/ UNWIND SECTION VAN VLAANDEREN 2 BOWL HORIZONTAL IMPREGNATION Location : EUROPE (Western and Northern)

Price : On request

Model MN lamination unit machine has been designed and built according to the reference regulations listed at Year(s) : 1998 Location : EUROPE (Central and Eastern)

Price : On request

1 SABEN/BENGUEREL stenter year 2003 With a BIANCO padder year 2005 at the entrance, cylinder width: 3.60 m 1 B Year(s) : 2003, 2005 Location : EUROPE (Western and Northern)

Price : On request

2 mt working width, 2.2mt roller width maximum machine speed 60 mt/min air consumption 60 L/hr (unwinder, accu Year(s) : 2013 Location : MIDDLE EAST

Price : On request

Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

suitable for woven fabrics This is a rotogravoure coating system and doesn't has doctor blade head. the glu Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

ISOTEX LINE, year of construction , working width 2600 mm, composed of: entry with 2 cylinders brushing de Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

max. working width 2400mm (max roll width = 2600mm) positioning cylinder, angle guides, speed control, separat Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

With foam generator Year(s) : 2016 Location : EUROPE (Western and Northern)

Price : On request

~300mm working width consisting of: Unwind Stand, 2" shaft. Holder 6.5" OD x 14.5" face with 2" wide locking Location : AMERICA North (USA-Canada-Mexico)

Price : On request

5400mm wide (212"), 2004 yr. The coater is dip and nip (between 2 rolls to squeeze of coating) with agitators Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6 compartments with 6 modern Maxon burners horizontal pin chain with 860 needle bar carriers Unroll at the inl Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

RCM Knive over roller coating head Roller width 3.400 mm Electrical panel needs to be remade. Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

General description: Different methods of production can be realized, machine is designed for coating on a pre Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 COATING HEADS 2 THERMAL OIL HEATED OVENS ROLLER WIDTH 3.300 MM INVERTERS DRIVEN CONTROL PANNEL Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

160 cm working width. Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Working width 2400 mm 2 blades ( on air and over roller), engraver roller including Rollmac GEMATA FOAMIX, and Year(s) : 2016 Location : EUROPE (Western and Northern)

Price : On request

Maguire Pellet Hopper/ Weigh/ Feed (Type WSB 440) Bolton Emmerson Extruder Bolton Emmerson Extrusion Pump Flat Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request