1/1
Mycom Complete Freezing Installation 683 kW
EUROPE (Western and Northern)
Mycom/Mayekawa
Year of Manufacture:2012/2015
Used complete Mycom/Mayekawa freeze pump installation.
This ammonia freezing installation, which is in new condition
is composed by the company Comron International BV
of the following main components:
1 piece complete Mycom/Mayekawa screw package type 200VLD, year 2012. E-motor 315kW WEG, thermosiphon oil cooler, eco connection and new Siemens S7 PLC/Simatic touchscreen.
2 pieces complete Mycom/Mayekawa screw package type 200VMD, year 2012. E-motor 315kW WEG, thermosiphon oil cooler, eco connection, and new Siemens S7 PLC/Simatic touchscreen.
Switch cabinet brand Schneider with 2 pieces frequency regulators for the compressor type 200 VMD and 1 piece soft starter for the compressor type 200 VMD, new Siemens S7 PLC/Simatic touchscreen.
New low-pressure separator -40°C (surge drum) with a volume of 3.5 m³ with 2 pieces of ammonia liquid pumps.
New eco vessel -10°C with a volume of 1m³.
High pressure liquid tank for thermosiphon application.
Custom-made software for the control of the entire system.
1 piece Baltimore / Evapco evaporative condenser of your choice.
All necessary valves, floaters, electronic liquid regulators, Danfoss valves, for the complete installation.
All necessary P&ID drawings, E-schemes and PED pressure certificates.
Mentioned cooling capacity of 683kW is with the refrigerant R717/Ammonia at -40 °C / +35°C
of which 2 pieces of Mycom compressors type 200 VMD run at 60 Hz at 3600RPM.
Cooling capacity with an extra frequency controller for the compressor Mycom 200 VLD = 730 kW.
Cooling capacity:683 kW/200 tons
Type of refrigerant:R717/Ammonia
Voltage:50/60Hz - 400V / 460 V
Absorbed power:Ca.500 kW