MPI Thermal TA-5000A-1-1 Temperature Forcing Test System

The MPI ThermalAir TA-5000A is a compact,
portable benchtop environmental heating and
cooling temperature forcing air stream system.
Instead of taking your parts that need temperature
conditioning to an large oven or large environmental chamber,
our thermal test system allows you to
perform your thermal test temperature profiling right
where you need it – at your test bench,
on your production floor or in your test laboratory.

The ThermalAir TA-5000A Temperature Forcing System with a
wide range of temperature capabilities. -80°C to +225°C
environmental test. The TA-5000A is used for
temperature testing in engineering product development
test labs and production test floors for semiconductor IC
devices and all kinds of electronic – non-electronic components
and other parts and assemblies.

The unique architecture of the ThermalAir TA-5000A features
unprecedented performance while saving up to 50% on
electricity costs.

The MPI ThermalAir TA-5000A has a front panel display and a
thermal head display. The thermal head color touch screen
gives the user the ability to set temperature parameters and
monitor all system operations at the test site location.

Features and benefits of the TA-5000A include:
Ultra Cold Temperatures maintained at 50Hz & 60Hz
Dual Touch Screens Front Panel & Thermal Head
Plug-in anywhere from 200 to 250VAC, 1Ø
ECO Smart DC system for up to 50% energy saving
No voltage configuration to use at different locations
Versatile Boom & Stand – Extended reach standard
SSD for thermal file management and data logging
Control Heated dry air purge for frost free operation
One touch Temp Cycle, Ramp, Soak and Dwell
Ultra low audible noise for quiet engineering lab use
(DC Chiller)

Specifications of the MPI TA-5000A Temperature System include:
Airflow: High capacity 10 l/s (20 scfm) continuous airflow
optimizes temperature transition rate and throughput.
Typical Temperature transition rate: -55° to +125°C: approximately 10 seconds and +125° to -55°C:
approximately 10 seconds
Temperature Control: Environment Air or
External DUT sensing directly at the DUT case to ±1.0°C
Temperature control Sensor Ports: Type T or
Type K thermocouple, and 100 ohm RTD
Temperature set, display and resolution: ±0.1°C
Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF,
And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS
Auto Start Test & End of Test for automatic temperature cycling
Hot-Cold-Amb. All this makes for
simple control and service ability.