Landis 30 ANGLE HEAD CYLINDRICAL GRINDER

10 x 24 3R LANDIS 30 ANGLE HEAD CYLINDRICAL GRINDER
Year: 1978

STANDARD CATALOG SPECIFICATIONS
Nominal work swing..................................... 10"
Maximum work swing over table.......................... 10 31/32"
Nominal distances between work centers................. 24"
Maximum work swing and diameter standard machine will
grind with full size standard wheel on machine with
hydraulic in feed stroke............. 10" 6\"‑2" H.I.
Minimum diameter wheel to grind zero diameter work on
centers................................................ 20"
Coolant tank capacity.................................. 40 gallons
Hydraulic tank capacity................................ 19 gallons

WORK CARRIAGE
Traverse speed, all lengths thru 72"............... 2 to 240 IPM
Traverse speed, per turn of hand wheel:
(slow)............... 0.100" (fast)................... 0.750"
Work rest capacity..................................... 1/2" to 7"

HEADSTOCK & FOOTSTOCK
Work centers....................................... No. 10 Jarno
Foot stock center movement by................ lever and hand wheel
Head stock work speeds RPM
Dead spindle.................................. 72‑116‑185‑300

WHEELHEAD & WHEELFEED
Grinding wheel, size (standard).................... 8" x 24" x 12"
Grinding wheel, maximum width........................... 8"
Grinding wheel, spindle speeds..................... 800/964 RPM
Grinding wheel, minimum diameter of worn wheel.......... 12"
Basic machine................................. 0.0003" to 0.004"
Machine w/hydraulic in feed................... 0.0002" to 0.004"
Distance wheel centerline to work centerline:
Work diameter reduction per revolution of wheel feed
Hand wheel.............................................. 0.100"
Work diameter reduction per revolution of fine knob:
Basic machine........................................... 0.010"
Hydraulic in feed....................................... 0.001"
Maximum hydraulic in feed on diameter for hydraulic
in feed machines........................................ 0.090"
Rapid in feed stroke for hydraulic in feed machines:
Maximum................................................. 2"
Minimum................................................. 1/2"

ELECTRIC MOTORS
Wheel drive motor....................................... 10 HP
Wheel spindle lubrication pump motor.................... 1/4 HP
Work drive motor........................................ 1/4 HP
Hydraulic pump and lubricating drive motor.............. 2 HP
Coolant pump motor...................................... 1/4 HP
GENERAL DATA
Swivel table graduated inches per foot................. 4 1/4"
Degrees included angle................................. 19 degrees
Height from floor to work centerline................... 40 3/4"
Net weight......................................... 10,400 lbs.

EQUIPMENT & FEATURES
Plunge control stepping motor
Hydraulic operated tail stock
Behind wheel tru-form dresser
Landis microtronic controls
Microsphere bearings