Landis 2R

LANDIS 2R
NEW 1967/REBUILT 2007

CUSTOMER BOUGHT MACHINE REBUILT FROM GCH
ACQUISITION COST WAS 60K IN 2007!

MAXIMUM SWING OVER TABLE........................ 10-31/32"
DISTANCE BETWEEN CENTERS........................ 24"

TABLE:
SWIVEL TABLE GRADUATED (IN. PER FOOT)........... 4-1/2"
SWIVEL TABLE GRADUATED
(DEG. INCLUDED ANGLE)......................... 20 DEGREES

WORK CARRIAGE:
TRAVERSE SPEED.................................. 2 TO 240 I.P.M.
TRAVERSE PER TURN OF HANDWHEEL: SLOW............ 0.100"
FAST............. 1.000"

WHEELHEAD & WHEEL FEED:
STANDARD GRINDING WHEEL SIZE.................... 14" O.D. X 2"
WIDE X 5" HOLE
SWIVEL RANGE: UPPER............................. 180 DEGREES
LOWER........................................... 60 DEG. CLOCKWISE
30 DEGREES CCW
(2) GRINDING WHEEL SPINDLE SPEEDS............... 2005-2533 R.P.M.
WORK DIAMETER REDUCTION PER REVOLUTION
OF HANDWHEEL.................................. 0.100"
WORK DIAMETER REDUCTION PER REV.
OF FINE FEED KNOB............................... 0.001"
MAXIMUM HYDRAULIC FEED ON DIAMETER.............. 0.090"
RAPID HYDRAULIC INFEED STROKE................... 1-1/2"

WORKHEAD AND TAILSTOCK:
INFINITELY VARIABLE WORKHEAD................... 30-150 RPM
120-600 RPM
WORKHEAD TAPER................................. #10 JARNO
DIA. OF HOLE, WORKHEAD SPINDLE................. 1"
WORKHEAD SWIVEL RANGE.......................... 120 DEGREES
WORKHEAD SPINDLE NOSE.......................... 5A-2
TAILSTOCK TAPER................................ #6 JARNO


APPROX. MACHINE WEIGHT ...................... 8,000 LBS.

EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE
FULL AUTO CYCLE:
HYDRAULIC TABLE TRAVERSE
AUTOMATIC INFEED PER TABLE REVERSAL
AUTOMATIC PLUNGE INFEED MECHANISM
POWER RAPID WHEELHEAD ADVANCE& RETRACTION
SPARKOUT TIMER
UPPER & LOWER WHEELHEAD SWIVEL
DUAL LIVE/DEAD HEADSTOCK SPINDLE
14" DIAMETER GRINDING WHEEL
BIJUR ONE-SHOT LUBRICATION SYSTEM FOR WHEELHEAD
SELF-CONTAINED COOLANT SYSTEM IN THE BASE
5 H.P. 3/60/230-460 VOLT WHEELHEAD DRIVE MOTOR