Gleason 119 1200 RPM HYPOID SPIRAL BEVEL GEAR LAPPER

119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER


To nose of pinion spindle (maximum) 10-1/2" (267MM)
To nose of pinion spindle (minimum) 6-1/4" (169MM)
To nose of gear spindle (maximum) 10-3/4" (273MM)
To nose of gear spindle (minimum) 5" (172MM)
Center of pinion spindle (maximum) 3" (76MM)
Diameter of gear (maximum nominal) 17" (432MM)
Diameter of gear (maximum actual w/extended guard 22” (559MM)
Vertical .040" (1.0MM)
Horizontal .040" (1.0MM)
Backlash .150" (3.8MM)
Diameter of spindle taper hole at large end 3-29/32" (100MM)
Spindle taper per foot 39/64" (15MM)
Depth of spindle taper 6" (152MM)
Diameter of hole through spindle 3-1/2” (89MM)
Hydraulic pump 3/4 HP, 1800 RPM
Drive spindle speed 600 & 1200 RPM
Main motor (two-speed) 2-1/2 HP, 900 RPM
Lapping compound pump motor 1/2 HP, 1800 RPM
Oscillating drive motor 1/15 HP, 0 TO 1725 RPM
Floor space 64" X 90" (163X229CM)
Lapping guard closed 59-1/2" (151CM)
Lapping guard open 81-1/4" (206CM)
Net weight 11,000 LBS (5000 KG)