Fuji sFAB-D odd-form inserter

Fuji sFAB-D automated odd-form inserter (2017)
Multi-purpose automated fabrication machine,
flexibly supports various part sizes, shapes,
and supply packages, from leaded parts to
large odd-form parts, and automates insertion processes that
are performed manually, providing stable quality and production.

Head Configuration
Head 1: sH02C
Support for parts from small parts to large parts.
This head can handle 2 parts on one head at the same time,
and supports parts from small parts to large parts.
This head is appropriate when assembling various
different part types.

Head 2: sOF
Highly effective head for high-mix low-volume production.
The clamp width can freely be selected by shifting claws
using a motor.
Therefore, this head reduces the frequency of
tool exchange and is effective for
increasing productivity during high-mix
low-volume production.
It is possible to change the holding force using torque control,
and to use pickup nozzles and part lead chucks.
Therefore, a wide range of part types can be supported.

Parts Supply Devices
Front: sMTU-LT2 tray unit
The tray unit has the upper and lower magazines and
can supply parts during production,
so there will be no downtime due to part supply work.

Rear: BPU (bin picking unit)
It is possible to automate insertion of loose parts that
are not arranged in tape or trays by
supplying these parts as is without performing extra work.
This can supply 5 types of loose parts.
Changeover is easy because only carrier sections
are exchanged.