DMT BOPP Line 2800kg/h

Number of layers: 3
Material: BOPP
Output: 2800kg/h
Width: 6800mm

Extruder 1: Davis Standard, co extruders with maximum output 150kg/hr and 200kg/h DC drive,
02 co extruder motors stand by L/D30:1 included with double filters with surface area 0.81m2/unit

Extruder 2: twin screw extruder, TM133MW, 2800kg/h, melt pump Maag, AC drive main filter: L.666 surface area: 6.36 m2

Extruder 3: co extruders Davis Standard, 2 co extruders
with maximum output 150kg/hr and 200kg/h DC drive, 02 co extruder motors stand by L/D 30:1

Included with double filters with surface area: 0.81m2/unit

MDO: 14 pre heating rolls, electrical heaters, 4 stretching rolls,
circulating oil, 2 annealing rolls, electrical heaters, 5 nip rolls, AC drive, stretching ratio 1:1-1:6

TDO: chain and chain track system, heating system circulating
air via individual heating system/zone electrical heater, motors, fans, sensor, etc., edge guide system at inlet

Pull roll unit: cromed rolls chilled by water, edge trim on line recycling
unit, 2 corona treatment stations up and down double treated, AC drive thickness gauge x ray, measurement range 5-100micron

Rewind: turret automatic change
Atlas slitter and rewinder: 6.8m, 1000m/min CW964 10 stations
Maximum mechanical speed: 280m/min
Edge recycling system
Pneumatic conveying system
Cyclone to separate resin and conveying air
Metal separator
Mixing hopper
Suction conveying for co extruder
Edge trim recycling
Edge trim grinder
Conveying fans
Recycling system: Erema 500kg/h RM80T
Utilities: compressor, boiler, silos, mill rolls, mill roll stands corona and nip, nip rolls stands, overhead crane 10TM