Cincinnati 72" x 10" x 60,000 Lb Slitting Line
AMERICA North (USA-Canada-Mexico)
72" x 10" x 60,000 Lb CINCINNATI Slitting Line
SPECIFICATIONS:
Coil Weight, Max.: 60,000 Lbs.
Coil I.D., Entry: 20" to 24"
Coil I.D., Exit: 20" and 24"
Coil O.D., Max.: 72"
Coil Width: 12" to 72"
Thickness: 0.0924" to 0.375"
Shear, Max.: 45,000 PSI
Yield, Max.: 45,000 PSI
Line Speeds: 100/200/300 FPM @ 24" Dia. Bare Drum Speed
Line Direction: L-to-R
Mode of Operation: Pull Thru / Slitter Assist
CONSISTING OF:
Entry Turnstile:
(3) Arms x 60,000 Lbs. Per Arm
Powered Rotation
Slotted for C-Hooks
Entry Coil Car:
Mast Type
Floor Mounted
Self-Contained Hydraulic Unit
Powered Lift & Traverse
Cable Reel
Uncoiler:
Single Mandrel Type
Powered Expansion
Hold-Down With Powered Snubber Roll
Wichita Water Cooled Brake with Cooler
Slide Base
Feed-Up Drive
Entry Unit:
Extending Blade Type Peeler
Entry Pass-Line Roll
Manual Side Guides
Powered Entry Pinch Rolls
Crop Shear-Down-Cut type
Carry-Over Table
(2) Slitter Heads:
Crane Removable Type
10" Diameter Arbors
Powered Outboard Retraction
Powered Top Arbor Adjust
Over the Arbor Design to Slit 36" to 72" Widths
Stationary Slitter Drive Base:
75 HP, 650/1950 RPM DC Motor
27.43:1 H & S Speed Reducer
Powered Head Lock
Pit Section:
Mounted to Tension Stand
Entry Pass-Line Roll
Carry-Over Table
Coil Pro Tension Stand:
Age: 2000
Drag Type
Clam Shell Opening
Separator Arm on Slide-Out Frame
Internal Deflector Rolls
Exit Crop Shear, Down-Cut Type
Recoiler Feed Table
(2) Scrap Winders:
Automatic Scrap Dump
Level Wind
Recoiler:
Chicago Recoiler Drum
Age: 2008
Drum Diameter: 20"
Hydraulic Expansion and Gripper
Hydraulic Push-Off
50:1 Internal Gear Reduction
100 HP, 650/1950 RPM DC Motor
Drive-All Reducer With (3) Speeds
Bolt-On Risers: 24" I.D.
Overarm Separator Assembly:
Floor Mounted
Banding Assist Arm
Exit Coil Car:
Mast Type
Floor Mounted
Self-Contained Hydraulic Unit
Powered Lift and Traverse
Narrow Coil Retaining Tracks
Cable Reel
Exit Turnstile:
(2) Arms x 60,000 Lbs. Per Arm
Powered Rotation
Powered Push-Off
Slotted for C-Hooks
Electrical Controls:
Age: 2006
Main Operators Control Panel With Touch Screen
AC/DC Control Cabinets
Eurtherm 590+ DC Drives
Hydraulic System
Tooling:
Shimless
Multiple Sets of Tooling
Knives
1" Knives New In 2019 (Never Used)
Steel Spacers
Rubbers
Separator Tooling
Line Installed
REQUIRED FLOORSPACE: 50' x 90'