Used Yarn manufacturing (sythetic, cotton...)

– 12 tines/spindles for 8″ x 200 mm biconical useful cone. – One sided. – Paraffinizer. – External measurement Location : EUROPE (Western and Northern)

Price : On request

– 3 tines/spindles. – 100 mm cone with footage and liquid paraffin. – External measurements of 1,110 x 700 mm. Location : EUROPE (Western and Northern)

Price : On request

– 3 tines/spindles. – 100 mm cone with footage and liquid paraffin. – External measurements of 1,110 x 700 mm. Location : EUROPE (Western and Northern)

Price : On request

Martori brand – 2 tines/spindles. – 100 mm cone with footage and liquid paraffin. Location : EUROPE (Western and Northern)

Price : On request

brand Martori – 2 tines/spindles. – 1 spike for a 100 mm cone without footage and with liquid paraffin. – 1 p Location : EUROPE (Western and Northern)

Price : On request

– 10 tines/spindles. – 1 Splicers. – Revised. Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

– 4 tines/spindles for a 6″ x 4-20º and 5-57º cone. – Individual motor per spike. – 1 sections of 4 spikes/sec Location : EUROPE (Western and Northern)

Price : On request

– 2 tines/spindles with one motor per tine. - Paraffin. – Gatherer to two ends. – Electronic shots by wire. – Location : EUROPE (Western and Northern)

Price : On request

– 4 spikes. – 6″ impeller with a 4-20º cone. – To double 2 or 4 ends. – 2.25 hp motor at 230/400 V. – External Location : EUROPE (Western and Northern)

Price : On request

– 1 room of 4,000 x 12,000 x 4,500 mm. Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

– Working width 1,000 mm. – Inlet and outlet Ø300 mm. – Measures of condenser 1,300 x 1,000 x 1,000 mm. – Silo Location : EUROPE (Western and Northern)

Price : On request

– Width of 1000 mm. – Ø300 mm inlet. Location : EUROPE (Western and Northern)

Price : On request

– 12cv. 220/380v. – inlet 300 mm.Ø Year(s) : 1981 Location : EUROPE (Western and Northern)

Price : On request

– Useful width of 1,000 mm. – Ensiamage system. – PVC telera. – Ø960 mm drum with 1,270 Ø8 x 30 mm conical nai Location : EUROPE (Western and Northern)

Price : On request

– 10 hp motor at 1,440 rpm and 230/400 V. – Useful width of 700 mm. – Ø 800mm. – Length 2,500 mm + outlet. – 2 Location : EUROPE (Western and Northern)

Price : On request

– Main Engine 25 hp boot to 230/400 V. – Boot Ø1.000 x 700 mm working width. – 7.525 flat nails 2 x 5 x 18 mm. Location : EUROPE (Western and Northern)

Price : On request

– Drum of 2,000 mm useful width x Ø 518 mm. – Nails of Ø 4 mm conical x 12 mm long. – For fibers 60/70 mm long Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

– 12 tines/spindles (2 sections of 6 tines/spindles). – Direct engine. – 6″ x 5.57ºsmall cone. – Variable spee Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

– 12 tines/spindles. – 6” 4º-20 cone. Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Year(s) : 1994, 1995 Location : ASIA (South)

Price : On request

– 3 tines for 10″ x 5-57º cone. – Pineapple at 230 V. – 2 phases. – Independent benches. – Outside creel with Location : EUROPE (Western and Northern)

Price : On request

– 2 tines for 10″ x 5-57º cone. – Pineapple at 380 V. – Independent benches. – Outside creel with reserve. Location : EUROPE (Western and Northern)

Price : On request

– 4 heads. – From skein to cone. – For skeins from 500 to 700 gr. – Mechanical shots. – 20 mm wide winders. – Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

– 6″ x 4-20º and 5-57º race. – 1 Mach Mini type pick with 12-position revolver. – Cones of Ø120 mm maximum. – Location : EUROPE (Western and Northern)

Price : On request

– Multiple – Condenser – Silo – 10 cylinders – 7 hp discharge turbine Location : EUROPE (Western and Northern)

Price : On request