Menu

Used Textile and Leather Machinery

25,171 results
3

Roll Diameter 28 inches 120 Working Width Single Lane OPL Feeder- SN 50255 208v/60/3ph Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
15

TYPE BR-0-2PRA 96ºC VOL: 1 CAPACITY 2 EUROPALETS 2 DOORS 1 INPUT AND 1 OUTPUT 1 ELECTRO JET PACKAGING AND PAL Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

Fabric width: 180cm Inside diameter 120cm Machine max temperatuure 98°C machine It was initially working up t Year(s) : 1972 Location : -

Price : On request

More details  
5

DOGAL GUIDER AND CENTRALIZER ROLLER WIDTH 2.400 MM MAX. SPEED 80 m/min Year(s) : 2019 Location : EUROPE (Western and Northern)

Price : On request

More details  
9

ww: 2 m Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

More details  
17

table width 3400 mm. 3 cylinders dia.470 mm. differentiated squeezing. Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Capacity 300 Kgs, 2 tubes 1 nozzle per tube, programmer THIES T757xl Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

2 TUBE HIGH TEMP 140C 400 KG CAPACITY SETEX 737 WITH TERMOELETTRONICA PLC CONTROL PANEL. FITTED WITH CONTINUO Year(s) : 2014 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

80” Pad, top roll rubber 80” face x 14” diameter, bottom roll rubber 80” face x 14” diameter, pneumatic, 5 ton Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
19

Consisting of: Tension Bar Entry to Lattice Roll Guider to Operators Platform to Open Tenter 33FT long w/knit Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

300mm traverse x ~4"OD tube. Approximately 13,000 aluminum tubes available separately. Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

96 spindles, 8.5" rings, 14" traverse. (1) additional machine available for parts if needed. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

2500mm, refurbished and upgraded 2021 with complete controls. Needle Boards: 2 Needle Boards & 1 Dummy Board Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
3

USTER Evenness Tester type GGP-C14, S/N 922.4452, Lindly Electrotense attachment, S/N 431, 3 speed, Kidde 25 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

300mm traverse x 90mm core, (168) 2001 yr and (64) 2005 yr. Year(s) : 2001, 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

(3) 6 position banks of air texturing and 43 positions of Taslan texturing. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

stainless with fan. Last used in R&D operation. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Densitrol Evener Motion, emergency stop control for web and metal scanners (not included) 1/3 hp G.E. DC drive Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
7

COLLINS # 5 Spooler, 4 positions, with creel, tensioning stand 10" traverse x 12" diameter spools, yardage co Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

~30" wide, pin lagged cylinder, no motors but could be supplied. Designed to mimic Fehrer V21 type. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

Price On request

More details
2

16 positions each position independently driven with 1/2 hp 90v DC motor with v.s. control, UHING traversing Year(s) : 2016 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
3

126" wide, includes stationary jack-stand let-off 126" face lighted viewing board with pneumatic nip-hold down Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
5

200" wide, 224" let-off stand with supports, 224" tension bar, elevated operator platform, 200" x 11" dia be Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

TECTEX 2N , 1600mm with compressive batt feed, takeup winder. Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

195" x 8' 5" diameter ran 270-300 deg F. Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

Find used textile machines from the production of the yarn to the manufacturing of the finished textile

Yarn manufacturing machines such as carding, drawing, carding, spinning machines, twisting, two for one twisters, covering, texturizing, winding, and many more.
The next machines you will find will be for the fabric production by weaving, knitting, tufting and non woven.
Once the fabric is produced you will find machines to treat, and finish it.
There will be wet handling machines such as bleaching, dyeing, continous washing machines, textile printing machines, stenters and dry handling machines such as calendar, raising machines, emerizing, rope openers, saforizing, emboirdery machines and many more. All these machines will give added value to the fabric.
You wil also find more specifica machines that will make the finished product like rope baking machines, braiding machines, quilting machines.
Also listed will be machines for the manufacturing of garments: cutting, sewing, ironing.
There is also a section for laundry machines and an other one for leather machines.

More than 8 million textile machines have been sold in 2019 and this figure will double by 2025.

Largest textile machinery makers are Oerlikin, Rieter, Saurer Schlaforst, Murata, Toyota, Savio, Lakshmi, Van de Wiele, Itema and probably several Chinese makers.

More than 27,000 factories are registered on Wotol and 1800 used machinery dealers and agents .

 

Create an alert
});