Used Stock Preparation - Pulpers/ Deflakers/ Refiners/ Screens

Lamort Poire Purge Type PV2 with perforation 6,0mm like Fiberizer, reject discharge under pressure Consistenc Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Andritz Moduscreen C2H horizontal Pressure Screen, with perforated screen basket 2,0mm, Final Stage Pressur Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

Escher Wyss Double Disc Refiner Type DSR3-HEP With electr/mechanical disc adjustment and pneumatic quick rele Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Location : EUROPE (Western and Northern)

Price : On request

Contaminex™ CMV, for pulper detrashing in TwinPulp™ III systems for higher capacity Features • Operates inter Location : EUROPE (Western and Northern)

Price : On request

 Parts in contact to the pulp: stainless steel  Tank high 2.265 mm and diameter 3.800 mm  Consistency 6,5 – Year(s) : 1983 Location : EUROPE (Western and Northern)

Price : On request

Status: still on mill floor, erected – Model HP10DR 60 m3 – Capacity 600 – 900 Tpd – Holes plate 10 – 12 mm Location : EUROPE (Western and Northern)

Price : On request

– Production 400 Tpd – Built on stainless steel – Spare rotor included – Gearbox included power motor 700 kW – Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

Used vertical pressure screen, multifoil rotor Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Location : EUROPE (Western and Northern)

Price : On request

Voith Minisorter 0 and 01 used but reported in good condition Location : EUROPE (Western and Northern)

Price : On request

With a Reliance Type P 2000 HP motor 3 phase 4000 volt motor Hansen reducer Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

One (1) used Size 3 Diabolo detrashing screen, Stainless steel, rated 45 PSI. With 40 HP, 1800 RPM, 324T mot Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Double disc refiner Escher Wyss DSR 1 HEP Size: Max 250 KW Capacity:300 - 1800 l/min @ 3-6 % Stock cons. Location : EUROPE (Western and Northern)

Price : On request

Used pressure screen made by Voith Type MSA 10 / 10 2010s Location : EUROPE (Western and Northern)

Price : On request

Jones' 26 Refiner made by Beloit Location : EUROPE (Western and Northern)

Price : On request

1 unt x AGA Refiner DD 26 see photos Location : EUROPE (Western and Northern)

Price : On request

Used Egoutteur, wire width ca 3000 mm, diameter Cca 600 mm, made in stainless steel Location : EUROPE (Western and Northern)

Price : On request

THE CE BAUER 12" DISC REFINER IS A COMPACT AND MODULAR PILOT REFINER. IT HAS A START STOP CHAIN DRIVE WEIGHT Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Voith Finckh Wandel Drum Thickener 1250mm x 3000mm with Couch Roll Location : EUROPE (Western and Northern)

Price : On request

Sunds steep conical Deflaker with new Deflaker set Location : EUROPE (Western and Northern)

Price : On request

Voith Finckh Drum Thickener , with Coach Roll, Gravity Decker Location : EUROPE (Western and Northern)

Price : On request

Capacity: 115 ton/24 hours Fibre density on entrance: up to 4% Power requirement: 135 kW Engine power: 160 kW Location : EUROPE (Western and Northern)

Price : On request

Conical Refiner Model: RF-1 OptiFiner Year: 2002 Manufacturer: Metso/Valmet Capacity range: TPD 5-150 Motor po Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

Including the baskets: Built-in 0.3 mm slot, two baskets with holes 1.5 mm and 1.6 mm. Location : EUROPE (Western and Northern)

Price : On request