Used Single Screw Extruders

Screw Diameter 4.5" L/D Ratio 32:1 Cooling Water Cooled Vented Vented Barrel and Screw Drive Relince FLEXPAK P Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Number of screws: 1 pieces Screw diameter: 120 mm Screw length: 40 D mm Drive power: 80 kW Location : EUROPE (Western and Northern)

Price : On request

Screw Size 1.5" Gear Ratio 6.53:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Drive motor: 180 KW Throughput: 800-1000 kg per hour For plasticizing any shredded plastic waste. Finally, s Location : EUROPE (Western and Northern)

Price : On request

USED 410 KW d.c.MOTOR SICEMOTORI Complete with starter + transformer for inductance RECONDITIONED Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Single Screw Extruder Screw Size 1.5" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 2.5" Gear Ratio 17.28:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model 250 24:1 NVLH Screw Size 2.5" Voltage 460 Volt 3 Phase 60 Hz Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 2" Gear Ratio 6.53:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 3.5" Motor 75 HP Gear Ratio 17.43:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1971 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand Gloucester Screw Size 4.5" L/D Ratio 30:1 Cooling Water Cooled Motor 200 HP DC # of Barrel Zones 5 # of Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" extruder with 6" die 17.2:1 gear box ratio Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.25″ Wayne 30/1 L/D vented (plugged) extruder. Has electrically heated air cooled barrel, includes temperat Year(s) : 30 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" American Kuhne 30:1 L/D lowboy extruder Has electrically heated and air cooled barrel Driven by a 125 HP Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.5" 24/1 Killion Extruder Includes (3) control panels Zenith melt pump with 2 hp motor Strand die 6" wide f Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.25 24/1 L/D Davis Standard pedestal mounted extruder. Driven by a 5 hp DC motor and scr drive. Includes Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model:ME45 3 x 25D 45mm (1.77 inches) 4 heating Zones 2 tool Zone,4 Air cooled fans. Motor:14 Kw(18.77 HP) V Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3" Merritt Davis Extruder Year estimate:1980 Hp:60 hp Air cooled. Centerline of barrel is 43" from the floor Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw diameter:72mm (2.83”) Motor: 60 H.P,480 V Screw ratio:24:1 Air cooled Screw speed:8-58 RPM Need some plu Year(s) : 1976 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" cen Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Dri Location : AMERICA North (USA-Canada-Mexico)

Price : On request