Used Plastic Machinery

1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Cooling Tank 240V/3HP/60CY Location : AMERICA North (USA-Canada-Mexico)

Price : On request

10" x 40 Granulator Five Knife Open Rotor Two Bed Knives 40 HP Lincoln Motor 230/460 Rated For Up To 1,200 LBS Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.0" Killion Extruder 24:1 L/D 5 HP DC Motor 240V Single Phase Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" x 48" Gatto Puller Model 207-6PC-48 Currently has single chain with 3.5" capacity to add an additional ch Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6" Barrel For Davis Extruder 30:1 L/D Ratio Non-Vented 9.55" OD 176" Long Flanged End Location : AMERICA North (USA-Canada-Mexico)

Price : On request

50,000 lb/s Per Hour Pellet Rate 300 GPM Water Rate 43" Diameter Circular Housing 106" Long 20 Hp Motor 143" H Location : AMERICA North (USA-Canada-Mexico)

Price : On request

72mm Twin Screw Extruder Model PSHJ72 With Control Panel Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Clamp Force 35 Ton Screw Diameter 94MM Shot Size 1.3 OZ Platen Size 14.69" x 14.69" Tie Bar Spacing 10.24"x 10 Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24" x 48" Pagani Wet Granulator Model 60120 FAP 9 Knife Open Rotor 2 Bed Knives FAP Rotor 150 HP TECO Motor Hy Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand Polymer System Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4" Accrapak Strand Pelletizer Direct Drive Rotor Dimensions: 5' x 5' x 7' Location : AMERICA North (USA-Canada-Mexico)

Price : On request

20mm Theysohn Co-rotating Twin Screw Extruder Model TSK-TT 020/28D 28:1 L/D Ratio 3.75 KW Main Motor 1,750 RPM Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4" x 15" Gatto Belt Puller 1 HP DC Motor With Boston Gear DC Drive Approximate Dimensions: 35" L x 24" W x 60" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

37" Wide Cumberland Granulator Model 37F 7 Knife Closed Rotor 150HP 1780 Motor 167 amp/460 volt Belt Driven In Location : AMERICA North (USA-Canada-Mexico)

Price : On request

5032 BF Spin Dryer 32" Diameter Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Approx. 19" Max Profile Width Pneumatic Clamp Driven By (2) 2 HP AC Motors Through Planetary Gear Reducers ABB Location : AMERICA North (USA-Canada-Mexico)

Price : On request

17.5" Wide x 42" Long 2 United Plastics Equipment 2 Belt Puller Approx. 19" Max Profile Width Pneumatic Clamp Location : AMERICA North (USA-Canada-Mexico)

Price : On request

SlimLine Dryer with Hopper Model SL50 16-50 lbs/hr 100-350 F Comes With Loader Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used Mitt Merril (Jordan Reduction Solutions) Hog Granulator Model 13CSD Approximately 100 hp 15" x 18" Throa Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used 4.5"Accrapak Strand Pelletizer Helical Rotor, 24 Cutters, 2.4 HP Direct Drive Motor, 1410-1690 RPM 5" Rub Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used 24" x 36" Nelmor G2436M1 Granulator 3 Knife Closed Rotor Missing Hydraulic Hopper Tilt Mechanism Missing Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used 10" x 12" Rapid Granulator With 8" Wide Pull Rolls 8" Wide Top Feed Pull Rolls With One Smooth Steel Roll Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24 Knife Helical Rotor One Rubber Roll One Steel Roll Pneumatic Roll Hold Down, Dual Ac Drives For Main Motor Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used Weima WLKM 10 Single Shaft Shredder Approx. 40" Wide Rotor 18 Rotor Knives 2 Bed Knives 3/4" Screens Incl Location : AMERICA North (USA-Canada-Mexico)

Price : On request