Used Medical Imaging
4,652 resultsTechnical Details - Flex Coil Interface (Preamp 1) Field strength in tesla 1.5 Location : Austria
Price : On request
More detailsKey facts: Coil type: CP Peripheral Angio Array Channels: 8 Make: Siemens Partnumber: 5514752 Compatibili Location : Austria
Price : On request
More detailsYou can find used Medical Imaging on Wotol
The main manufacturers of Medical Imaging are GE, Siemens, Philips, Toshiba, OEC, GE Healthcare, Hologic, Hitachi, Konica, Fuji Film, Fuji, Shimadzu, Ziehm, Agfa, Esaote.
The main models are Aquilion 16, 9800, LightSpeed 16, SOMATOM, Sensation 64, AMX4, 9900 Elite, LightSpeed VCT, 600CD, Discovery CT750 HD, Trilogy Linear Accelerator, BV Libra, Definition AS20, AQUILION 64, LightSpeed VCT 64, Optima 660, Optima 360, Lunar Prodigy, AVANTO 1.5T, Emotion 16, MAGNETOM Symphony 1.5T, 9800 9in, 9900 Elite 9in, VANTAGE TITAN 1.5Т, AQUILION CXL 128, DRYPIX1000, DRYPIX 7000, FCR Speedia CS.
Questions and answers between users
Q: What is the benefit of a 3T MRI scanner compared to a 1,5 MRI scanner?
A: A 3T MRI scanner is twice more powerfull than a 1.5T MRI.
3T is ideal for imaging of small bones, breast MRI, musculoskeletal MRI, neurological MRI and vascular MRI, where the smallest details are particularly crucial for diagnosis. However, a 3T machine is not always the best for all types of imaging. 3T has a higher probability of artifacts. An artifact is any object that appears in the image that is not in the original object. These can show up in MRI images as “flow” artifacts due to the movement of blood or fluid. A 3T machine also creates additional heat and more noise compared to a 1.5T. 3T MRI scanner has a field strength twice as powerful as a 1.5T MRI
A 1.5T machine is ideal for MRI scans of the abdomen and chest. A 3T machine will provide extremely clear and vivid images. Plus, they can often be done faster, reducing overall scan time.
Last point, a 3T MRI is about 50% more expensive than a 1.5T
Q: What does the DR and NX stand for the Agfa workstation linked with CR85-X multi-user digitizer.
A: The DX is the software thet controls the WiFi sensors while the NX sofware is for the numerical plates.