Used Manual Lathes

Kanto Seiki CS-550 φ360×550　 Cross φ210　 Bore φ40 85～1800rpm (6 steps)　 Tail stock-120mm　MT-4 Location : ASIA (North East)

Price : On request

KYOKUTO DYNA-1200 24inch 4jaw chuck 3 axis scale Location : ASIA (North East)

Price : On request

Okuma LS540 Center distance：800 Swing over bed：540　 Swing over carriage：350 Hole through spindle：52　35～1800rp Location : ASIA (North East)

Price : On request

Takisawa Machine Tool Co., Ltd. Model TSL-550 φ360×550　 φ190 4jaw independent chuck 83～1800rpm　 2.2kw　 Oppos Location : ASIA (North East)

Price : On request

Zubal Characteristics Flip: 500 MM Distance between points: 950MM Spindle speed: Low: 21-180 RPM High: 224- Location : AMERICA (Central and South)

Price : On request

TUDA Flip Features: 400 MM Distance between points: 1060MM Spindle speeds: Low: 75-200 RPM High: 400-1800RPM Location : AMERICA (Central and South)

Price : On request

Poreba 900 x 2000 mm Features Tipping: 900 MM Distance between points: 2000 MM Power Supply: 380v, 50 Hz St Location : AMERICA (Central and South)

Price : On request

Tos 400 x 1000 MM Flip Features: 400 MM Spindle speed: Short: 22.4-1000RPM High: 45-2000RPM Distance between Location : AMERICA (Central and South)

Price : On request

kopings 500 x 1000 MM Characteristics Flip: 500 MM Distance between points: 1000MM Power: 380V, 50Hz Location : AMERICA (Central and South)

Price : On request

Warner & Swasey Square Head 4A Model 4A M-3550 Swing 28.25" Center Distance 62 in Dimensions 22' Long. X 84" Year(s) : 1977 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

WARNER & SWASEY 4A M-3550 Year: 1980 Swing 28.25" Center Distance 62 in Dimensions 20' Long. X 84" Wide X 84 Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

VOEST LATHE 500 x 1000 APOLLO Characteristics Turning: 500 mm. Between point: 1000 mm. spindle: mm. Speeds: R Location : AMERICA (Central and South)

Price : On request

VOEST LATHE 500 x 1000 APOLLO 500 Characteristics Turning: 500 mm. Between point: 1000 mm. spindle: mm. Spind Location : AMERICA (Central and South)

Price : On request

Lathe 330x1000 HARRISON Characteristics Between points: 1000mm Flip: 330mm digital reference system Power: 38 Location : AMERICA (Central and South)

Price : On request

Colchester Between points: 1000mm Flip: 390mm Digital Reference System Power: 380v. Location : AMERICA (Central and South)

Price : On request

Feeler 11″ x 18″ Precision Toolroom Lathe TL-61 Swing Over Bed: 11″ Swing Over Cross Slide: 6″ Distance Betw Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Lathe, 520x1000, VDF Between points: 1000 MM Flip: 520MM Spindle speed: 22.5/ 1050 RPM Power supply: 380 V. 50 Location : AMERICA (Central and South)

Price : On request

Hardinge 9″ x 36″ Model: DSM-59 Swing Over Bed: 9″ Distance Between Centers: 36″ Travel Double Tool Cross Sl Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Mesta 6 70" 4-Jaw Face Plate, Threading Capabilities, Taper Cutting Capabilities Power Rapid Traverse to Carr Location : AMERICA North (USA-Canada-Mexico)

Price : On request

DSG 1910 x 60 Centre Lathe 3 & 4 Jaw Chuck Fixed Steady Chuck Guard Sliding Guard Rear Drilling Attachment Coo Location : AMERICA North (USA-Canada-Mexico)

Price : On request