Used Extrusion / Pelletizer and Others

Brand ZHOU spare sealing knife included zipper unwinder included scrap rewinder included the machine is power Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Includes spin dryer Model 8.1BF, die plate with cutter assembly, operator control, and 40 GPM water temperin Location : AMERICA North (USA-Canada-Mexico)

Price : On request

# of Strands 16 Rotor Size 3.5" Knives 6 Motor HP 7.5 Pelletizer Drive 300 HP Reliance Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tank Size Length 122" Width 10" Height 10" Voltage 460V / 3 Phase / 60 Hz Amps 30 Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tank Size 120 ", wide:10" Height: 10 " Voltage 460V / 3 Phase / 60 Hz Amps 15 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Auxiliary spray cooling tank with indexing capability for passing lumber under. Additional cooling nozzles pe Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Machine has a 36 knife helical style rotor and a 5HP 180-Volt DC motor with silicon controlled rectifier cont Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

stainless steel 2 stage spray tank 10′ long x 2′ wide x 2′ deep 10″ pipe, 2 stage spray tank Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Profile puller. 480-volt input. Touch pad controls. 2 belts with 6″ x 56″ long contact area. Each belt pow Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Number of layers: 11 Film structure: GAAJCEDIFHB, IGEAAAAAEHJ Material: CPP and barrier film Film width: 106" Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Meltblown non-woven material with over 99% filtration efficiency, perfect for HEPA filters and other specializ Location : EUROPE (Western and Northern)

Price : On request

1650mm wide Coextrusion V-PET sheet extrusion line. 2 x 120mm extruders, ABA , 1600mm die, 1650mm x 600mm ca Year(s) : 2013 Location : EUROPE (Western and Northern)

Price : On request

Extruder Brand Davis Standard Screw Size 6" L/D Ratio 30:1 Feed Screw Two-Stage (replaced in 2012) Motor 250 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Originally built in 1984 but upgraded in 2004 with new thickness control and drives. This is a 3 layer line wi Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

Hi Temp. Tandem Line with: Niehoff Wire Drawer/Annealer, Model MT200.4.1.6.2617, M/C 19.50.682, 2" Davis Std Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

13' Vacuum Sizer / Cooling Bath Serial number 8638 13’ long Hinged covers 3 zones Process control Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Hi Temp Extrusion Line Line Direction: Left to Right 630 mm KuKuMa Shaftless Driven Payoff Year of manufactu Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

90 mm (3 1/2") Extruding line, Thermatic II, 24:1 L/D Line direction: Right to left (2) Skaltek Portal Shaftl Location : AMERICA North (USA-Canada-Mexico)

Price : On request

60m Tandem Wire Insulating Line Line Direction: Right to Left Niehoff Wire Drawing Machine with Annealer Seri Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

John Royle / Davis Standard Medium Voltage CCV Line for up to 35 kV Line Components: (2) 90" AFA Payoffs, dra Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

63 mm (2 1/2") Davis Standard CV Line Product Sizes: Up to 7.35mm Line Direction: Right to Left 1.2 m (48") H Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 1/2" Davis Standard CV Line, 15:1 L/D Thermatic III 760 m (36") Davis Standard Pay off, shaft type, Air Lif Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3 1/2" Davis Standard CV Line, 15:1 L/D Thermatic II (2) 36" Davis Standard Shaftless Pay offs, with air lift Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3 1/2" Davis Standard 15:1 L/D Thermatic III CV Extrusion Line (2) 36" Sterling Davis Electric shaftless driv Year(s) : 1985 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

75mm Davis Standard 24:1 Extrusion Line, Therm III 75mm (3") Davis Standard Extruder, L/D 24:1 Electrically h Location : AMERICA North (USA-Canada-Mexico)

Price : On request