Used Downstream extrusion

Puller/Traveling Saw Combination. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pn Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Dual lane cleat type puller. Each puller has 7 ½” wide cleats with 42″ of contact length. Pneumatically actua Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Dual lane calibration table. 6′ long. Two ½ hp motors. 460/3/60 input power @ 7 amps. Six (6) position man Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having 4 ¼”wide belts with x 21″ long contact area. Belts driven by approximately a 2 HP 230/460-Volt A/C mot Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Nominal 18″ saw blade. Up acting cut with pneumatic hold downs Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Set up for right to left operation. Manufactured in 1992. Includes portable dust collector. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adju Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Set up for 9 1/4″ wide cleats with 120″ belt contact length. Chain driven with dual pneumatic gap adjustment. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven, with dual pneumatic gap adjustment. Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Set up for 9 ” wide cleats, which are missing. 96″ belt contact length. Chain driven with dual pneumatic gap Location : AMERICA North (USA-Canada-Mexico)

Price : On request

9 1/4″ wide cleats with 108″ belt contact length. Chain driven, with dual pneumatic gap adjustment. Air trav Location : AMERICA North (USA-Canada-Mexico)

Price : On request

9″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling Location : AMERICA North (USA-Canada-Mexico)

Price : On request

9 1/4″ wide cleats with 108″ belt contact length. Chain driven, with dual pneumatic gap adjustment. Air trav Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

9 1/4″ wide cleats with 108″ belt contact length. Chain driven, with dual pneumatic gap adjustment. Air trav Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Has nominal 4″ wide belts with 28″ of contact length. Gap is manually adjustable via hand wheel on top belt. Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Measures 40″ wide by 20′ long. Three vacuum pumps consisting of 5.5, 6, and 8 HP. Also has a water pump. He Location : AMERICA North (USA-Canada-Mexico)

Price : On request

13″ wide x 14’5″ long x 8″ deep stainless steel water bath Location : AMERICA North (USA-Canada-Mexico)

Price : On request

5′ long with single flat cover. Single compartment. Nominal 8″ x 8″ cross section. Stainless steel construc Location : AMERICA North (USA-Canada-Mexico)

Price : On request

122″ long x 10″ wide x 9.15″ deep. Includes heat exchanger, water pump, and starter with controls. Mounted o Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Belt measuring 23 ½” wide x nominal 61″ long. Two spring loaded chrome rolls with rotary unions feed the stai Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Belt Size 4.5" x 23.5" Horsepower 4 HP Servo Height Adjustment 40" to 43" Min. / Max Feet per Minute 98 ft/min Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type of Equipment Extrusion Vacuum Sizing Tank Tank Length 72" Tank Depth 6" Electrical Requirements 460v Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4 pieces Punching machines for pipes up to 100 mm and up to 160 mm Year(s) : 1977, 1978 Location : EUROPE (Western and Northern)

Price : On request