Zoll M Series CCT

The M Series CCT is designed with several user-selectable
features that allow operators to configure the device according
to their protocols and local requirements.
This manual describes the configuration options and how to change them.
This manual also lists the configurable features, options and default settings.
Some features are available to manual mode operators only.

Superior defibrillation
Superior pacing
Advisory capabilities
Transport-ready design
Easy-to-read display
Full range of parameters for a full range of patients
Flexible color display
Quick, easy connections

Zoll M Series CCT Specifications
Defibrillator
Waveform
ZOLL Rectilinear Biphasic.
Energy Selection: Selectable at 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 75, 100, 120, 150, 200 joules.
(Delivered into 50-ohm load.) Charge Time: Less than 6 seconds
with a new fully charged battery (first 15 charges to 200J.)
Depleted batteries will result in a longer defibrillator charge time.
Energy Display: Monitor display indicates both selected and delivered energy.

Synchronized Mode
Synchronizes defibrillator pulse to the patient’s R-wave. “SYNC” message displayed
on the monitor.
Marker on display and recorder paper identifies R-wave discharge point.
Advisory Function: Single analysis or programmable auto re-analyze x3
with programmable auto energy level selection, screen prompts,
and voice prompts. Charge Controls: Control on apex paddle
and on the device front panel. Paddles: External anterior/anterior adult and pediatric.
Adult paddles slide off to expose pediatric paddles.
Multi-Function Electrode (MFE) Pads: Specifically designed adult anterior/posterior
pre-gelled ZOLL MFE Pads, and Multi-Function stat•padz™ packaged in pairs.

Built-In Defibrillator Tester: Tests defibrillator energy output and continuity
of universal cable and paddles; documented on PCMCIA card and strip chart.

Defibrillation Advisory
Evaluates electrode connection and patient ECG to determine if defibrillation is required.
Shockable Rhythms: Ventricular fibrillation with amplitude > 100 μV
and wide complex ventricular tachycardia with rates greater than 150 bpm.
Multi-Function Electrode Impedance Measurement.

Range
0-250 ohms
Display
Screen Type
Color LCD. Screen Size: 6.5 inches (16.5 cm) diagonally. Sweep Speed: 25 mm/sec.

Viewing Time
4 seconds. Traces: 3. Information: Heart Rate, Lead/Pads, Alarm On/Off,
Advisory Functions and Prompts, Defibrillator Test Function,
Error Corrections and Faults, Code Markers, Alarm Selection, and Limits,
Delivered Energy, SpO2, Pacer Functions, EtCO2, NIBP, Invasive Pressures (2),
Temperature (2).ECG Monitoring

Patient Connection
3-lead ECG cable, 5-lead ECG cable, 12 lead cable, paddles or MFE Pads.
Input selection on the front panel. Input Protection: Fully defibrillator protected.
Special circuit prevents distortion of ECG by pacer pulse.(Pacer version only.)
Implanted Pacemaker Spike Display: Dedicated circuitry detects
most implanted pacemaker spikes and provides standard display marker
of a spike on ECG trace.
Bandwidth: 0.5-40 Hz (-3 dB) standard/0.05-150 Hz diagnostic.
Lead Selection: Displayed on the monitor.
ECG Size: 0.5, 1, 1.5, 2, 3 cm/mV – display on monitor.
Heart Rate: Digital display 0-300 bpm ±5%. Heart Rate Alarm: On/Off displayed
on a monitor.
User-selectable, tachycardia 60- 280 bpm, bradycardia 20-100 bpm