Weir and Harrod WR40, 12 Head Gravity Filler Screw Capper & Labeller

1x Weir & Harrod / Harlands Proteus, WR40, 12 Head Gravity Filler Screw Capper & Labeller

Description
• Make: Weir & Harrod, Harlands Proteus
• Model No: WR40
• Length: 5700
• Width: 1250
• Height: 2300
• Motor: 1&3ph, air
• Condition: good
• Output: upto 60/min

This used / secondhand filling line comprises of a 12 head rotary / carousel Weir and Harrod gravity filler
(model WR40), a single head screw capper and a single head Harlands Proteus self adhesive labeller.
The equipment has stainless steel slatband conveyor 82mm wide passing through the line.
The twelve head filler has scroll singulator to singulate the bottles prior to entry via the feedstar
which is designed to handle bottles 60mm in diameter
(other sized feedstars could be fabricated to suit the end users bottle size/s) into the rotary filler.

The filling heads are height adjustable for differing bottle heights and has filling nozzles approx 15mm diameter.
The filler has reservoir tank with 38mm diameter inlet.
The filler is guarded and is stainless steel construction and contact parts.
The single head variable speed screw capper (friction cap turner designed for plastic caps)
has cap feed chute to accommodate caps upto 38mm wide x 32mm high.
Has a control panel for controls for both the filler and capper.
The Harlands Proteus single head self adhesive labeller would require some tidying up
and has a small accumulation table at the end 490mm x 490mm.

The equipment does require some tidying up due to storage and minor touch up
(eg pressure roller on the labeller requires replacement).
The equipment requires both single and 3 phase power along with a source of compressed air.

The seller has outlined the filler is: capable of aproximately 60 per minute.
A previous owner filled Plax Mouthwash into plastic bottles
and I bought it off Barkers in Geraldine after years in storage.