Weinig UNIMAT 23 E

Planer
6 shafts
very good condition
only 4200 working hours

01 MACHINE, GENERAL :
G023 * UNIMATU 2 3 * YELLOW
LINE HI02 ** ATTENTION *** UNPLANNED VARIANTS AT THE END OF THE ORDER BILLS!
HI03 ** ATTENTION ** CONSTRUCTION REQUIRED!
P671 * SIGNS, OPERATING INSTRUCTIONS AND ETK - POLISH
D102 N ELECTRICAL, NORMAL

02 FEED RATE :
P280 * DOUBLE PENDULUM BEFORE DRESSING SPINDLE
V200 * FEED SPEED 6 - 36 M / MIN
M131 N FEED MOTOR WITH 4 KW
B160 FEED MOTOR WITH BRAKE
M227 N FEED MOTOR WITH 0.55 KW
W474 N TRANSPORT ROLLER WIDTH - STANDARD
W507 N TRANSPORT ROLLER SURFACE - TOOTHED

03 SPINDLE ASSEMBLIES :
B500 SPINDLE MOTORS WITH MECHAN. BRAKE SP01
== 1st SP. BELOW (ABR./EGAL.) === MAIN STAND
=== DB01 N DIAMETER 40 MM DRESSING SP.
ME01 N MOTOR 7.5 KW DRESSING SP.
HL01 MILLING SPINDLE HL-BEARING DRESSING SP.
NM01 SPINDLE SPEED 8000 1 / MIN DRESSING SP.

SP02 === JOINT SPINDLE RIGHT === MAIN STAND ===
DB02 N DIAMETER 40 MM SP.RE. (ADD)
MD02 * MOTOR 5.5 KW SP.RE. (ADD)
HL02 MILLING SPINDLE HL-BEARING SP.RE. (ADD)
NM02 SPINDLE SPEED 8000 1 / MIN SP.RE. (ADD)

SP03 ==== VERTICAL SPINDLE LEFT === MAIN
STAND === DB03 N DIAMETER 40 MM SP.LINK.
MD03 * 5.5 KW SP.LINKS HL03
MILLING SPINDLE HL-BEARING SP.LINKS NM03
SPINDLE SPEED 8000 1 / MIN SP.LINKS

SP04 ==== 2nd VERTICAL SP. RIGHT === MAIN STAND ===
DB04 N DIAMETER 40 MM 2nd
SP. RIGHT MD04 * MOTOR 5.5 KW 2nd
SP.RIGHT HL04 MILLING SPINDLE HL-BEARING 2nd
SP.RIGHT NM04 SPINDLE SPEED 8000 1 / MIN 2nd SP. RIGHT SP14

=== HORIZONTAL SPINDLE ABOVE === MAIN STAND ===:
DB14 N DIAMETER 40 MM UPPER SPINDLE
ME14 N MOTOR 7.5 KW UPPER
SPINDLE HL14 MILLING SPINDLE HL-BEARING SP.UPPER
NM14 SPINDLE SPEED 8000 1 / MIN UPPER
SPINDLE SP15

== HORIZONTAL SPINDLE BELOW === MAIN :
STAND === DD15 50 MM SP.BOTTOM
ME15 N MOTOR 7.5 KW SP.LOWER HL15
CUTTING SPINDLE HL-BEARING SP.LOWER
GJ15 STRAIGHTJOINTER SP.LOWER

04 TABLE :
STRUCTURE T011 N DRESSING TABLE, LEVELING ROLLER WITH 2.0 M
T062 * DRESSING TABLE FOR FOLDING UNIT,
F520 * FOLDING EQUIPMENT TABLE AND
FILLING LINE M385 MACHINE TABLE HARDENED WITHOUT A TRAVEL TABLE
A110 ADJUSTABLE OUTLET TABLE
05 PRESSURE, SPECIAL WOODEN
R410 PRESSURE ROLLERS SWIVELING AWAY FROM ABOVE A071
PRESSURE ROLLER LATERALLY IN FRONT OF ENTRY PA00 PRESSURE
REDUCING UNIT. WITHOUT ZUS. CONNECTION
07 ELECTRICAL EQUIPMENT
S380 N MAINS VOLTAGE 380 V 50 HZ ST-DR SWITCHING FROM 7.5 KW
T010 TRANSFORMER WITH 1000VA
HS12 CALCULATED MAIN SWITCH: MIN. 125A S011
SWITCH CABINET W = 600 H = 1200 D = 400
F125 PRE-FUSE MAXIMUM 125A
GN01 MACHINE WITH 1 AXIS
08 SAFETY
DEVICES S040 ELECTRIC MAGNETIC LOCKING OF THE SAFETY
HOOD 09 ACCESSORIES
H431 MACHINE WITHOUT STANDARD - PLANER HEADS WITH FOLDING
CUTTER B010 OPERATING HOURS - COUNTER
E010 PRECISE KNIFE ADJUSTMENT GAUGE FOR SMOOTH PLANER HEADS WITHOUT
MEASURING DEVICE CPL. (910 020)
E035 PIPE D = 40
E045 PIPE D = 50