Weinig Luxscan Combiscan C180

Scanner w/Opticut 450FJ+ & Opticut 450 Viper Optimizing Crosscut Saws with all Material Handling
Scanner installed new in 2007 and Upgraded in 2012
Production capacity: LF in eight (8) hours
COMBSICAN capable for multiple width operation at scanner and saws.
Multiple widths achievable existing automated movement of side camera
Able to process up to 300' per minute
4 side detection with laser cameras – knots, pith, cracks, worm hole, wane, edge defects, etc.
4 side detection for color defects – high resolution for accuracy
Angle cracks detection on top/bottom side
Optimizing software included
LuxOptim Optimizes the Cut Solutions of the Board Depending on the Customers Requirements
Dimter Opticut 450 Viper Saw # 1 (Purchased New in 2007 and upgraded in 2012)
10HP, 480V, 3PH saw arbor motor
3600 RPM
Blade Capacity: 500mm or 19.6"
Opticut 450 FJ+ Right Handed Through feed Optimizing Saws - Saw # 2 (Purchased New in 2012)
Each saw utilizes a 10HP Servo driven feed system allowing the saw to reach max acceleration of ft/min.
Saw Cutting Capacities
Incoming Board length: 24” minimum; 16’ 3” maximum
Board thickness: 5/8” minimum; 4.5” maximum
Board width: 1.625” minimum; 7.7/16” maximum
Board out-feed length: 6” minimum; 16’ maximum

Respective Material Handling Included:
Dimter Powered Roll Conveyor 17'2" Long
Dimter Rake Conveyor 18'4" Long
Material Transfers to Dimter Scanner Chain in-feed System with one Pin Stop
Scanner in-feed belt
Scanner Out-feed belt
Dimter "Y" Transfer for feeding two saws
Dimter in-feed for each respective saw
Dimter out-feed Sort Belts with Eight(8) Pneumatic Kickers