Weeke Optimat BHP Vantage 34M

Nesting CNC machining center
Technical data:
Basic machine
- Machine base frame in stable moving gantry design
- Moving gantry can be moved in the X direction
- Cross support can be moved in Y and Z direction
- Direct extraction at the drilling gear and milling spindle as well as separate extraction connection for the extraction system (on-site)

Guide system and drive technology
- Dust-protected linear guide system
- Double rack and pinion drive in X-direction and ball screw in Y- and Z-direction
Travel of the axes:
X = 3,780 mm
Y = 1,951 mm
Z = 155 mm

- Digital drive system in X, Y and Z direction (Sercos)
- Speed of the axes:
Vector speed:
X/Y = 96 m/min
Z = 25 m/min

Consisting of:
- maintenance-free motors with high-resolution optical encoders guarantee high accuracy
- Digital drive controllers guarantee high reliability
- Fiber optic cables protect against interference factors
- Automatic central lubrication of the two racks in the X-direction

Matrix table 10'/5', 3100 X 1550 mm
The working area can be traversed with all processing units without restriction.
MATRIX system with grooves in the grid for holding templates, vacuum suction cups and workpieces.
Grooves suitable for inserting a rubber sealing cord.
A wide variety of vacuum cup types are optionally available

Consisting of:
- 7 pneumatically lowerable workpiece stops including electrical end position monitoring
- Vacuum system for clamping the workpieces on the entire work table
- Vacuum system 500/600 m3/h, 50/60 Hz
- 12 meter rubber sealing cord
Worktable length: 3100 mm
Work table width: 1550 mm
Workpiece thickness: max. 80 mm
An automatic tool length check determines whether the milling tool needs to be automatically collated during the drilling process.

Configuration
V7, F1-HSK63-9 KW, W8 LATERAL
V7 HIGH SPEED 7500 Vertical drilling unit with 7 drilling spindles (individually controllable with variable speed range).

Feed stroke
- Z-direction: 60 mm
- Drilling depth: max. 38 mm (but up to 55 mm with special drill)
- Direction of rotation: right/left
- Speed: 1,500 - 7,500 rpm, frequency-controlled
- Drive: 2.7 kW
- Drill bit holder: d = 10 mm
- Total drill bit length: 70 mm
- Drill diameter: max. 35 mm
- Spindle distance: 32 mm
- Spindle type: individually controllable

F1-HSK63-9 KW
Automatic tool change spindle in combination with lateral tool change magazine.

- Tool holder: HSK63
- Tool feed: automatic
- Direction of rotation: right/left
- Speed: 1,250 - 24,000 rpm infinitely programmable
- Drive: frequency-controlled three-phase motor
- Max. power at the tool: up to 7.5 / 9 kW in continuous / intermittent operation (S1/S6-50 %)
- Spindle lubrication: Permanently lubricated with grease
- Cooling: air
- Extraction: central

Blowing nozzle
A blowing nozzle is integrated in the extraction hood, which can be activated when the milling motor is in use.

W8 SIDE
- Automatic tool change magazine with 8 pockets.
- Position: on the right side of the machine stand
- Tool holder: HSK63
- Magazine slots: 8 tool slots
- Tool weight: max. 5 kg total weight incl. HSK holder
- Tool diameter: max. 135 mm when fully loaded (8 milling tools)
- Tool change time: approx. 10 to 14 sec.
- Tool magazine: via integrated pick-up space in the changer
power control PC85T
Modern control system based on Windows PC

Hardware:
- PLC control according to international standard IEC 61131
- Operating system Windows XP (US) embedded
- PC with at least 2 GHz and 512 MByte RAM
- TFT flat screen 17 inch
- 1 hard disk at least 40 GByte
- 3 1/2 inch floppy disk drive
- CD-RW drive suitable for reading and writing CDs (no dust protection guarantee)
- USB connection on the control panel
- Digital drive technology via fiber optic cable
- Decentralized, digital field bus system
- EtherNet connection 10/100 MBIT RJ45 (without switch)
- Provision of teleservice (modem) Includes the general provision of the teleservice capability of a machine,
including the corresponding modem and the free use of teleservice services within the warranty period.
use of Teleservice services within the warranty period. After the warranty period, a corresponding teleservice contract must be concluded for the use of the teleservice.
- UPS (uninterruptible power supply) protects the computer from damage in the event of a mains fault,
overload and short circuit. In the event of a power failure, the computer is shut down shut down in a controlled manner after one minute to prevent data loss.
- Operating terminal with potentiometer and emergency stop switch.

Software:
- PC85T CNC core with:
- Path control in all axes and parallel sequences thanks to multi-channel technology
- Look-ahead function for optimum speeds at the transitions
- Dynamic feedforward control for the most precise contour accuracy

- PC85T software package with graphical operating programs:
- woodWOP for the graphical, dialog-oriented creation of CNC programs
- Graphical tool database
- production list management
- CNC operation
- Graphic display of document locations
- Error message in plain text
- Schuler MDE Basic for machine data acquisition
- Software function: Shifting a program
With this software extension, woodWOP programs can be mirrored in the workstation assignment differently than specified for the target workstation
- Software function: Work table optimization
The work table optimization program can combine and optimize the clamped workpieces
(with the same workpiece thickness) into a complete program. program and optimize them.
Tool changes can thus be minimized.
- 3D NC SIMULATION AND TIME CALCULATION (1 license)
- Graphic simulation of the CNC program in 3D
- Time calculation with an accuracy of +/- 10%
- Display of error messages
- Display and check of vacuum cup positions
Note: Not for motorized consoles
- Simulates all machining operations in X/Y/Z and limited C-axis (if available)
- Copy protection: License server

- Software package for external PC:
- woodWOP for the graphical, dialog-oriented creation of CNC programs
- DXF postprocessor Basic for connecting 2D CAD programs to woodWOP
- Import of 2D DXF files
- Conversion takes place according to defined profiles (rules)
- Display of geometry, layers and drawing elements
- Generation of the woodWOP program
- 3D woodDesign software with modern 3D interface for the interactive design of carcase furniture with output of woodWOP programs with
Components for the individual processing steps, which are processed one after the other
- woodNest Basic software for nesting woodWOP programs
- Manual positioning and rotation of workpieces with the mouse
- Optical distance control
- woodWOP Mosaic software for woodWOP file management with graphical preview
- this software can be used to graphically manage woodWOP files and entire directories
- programs can also be loaded or added using drag and drop
- woodType software for creating milling programs for lettering and texts in all available Windows TrueType fonts
- Only executable under Windows NT4, W2K or XP

CE safety and protective device
- Safety grille in the side and rear area with safety door
- CE safety light grid in the front area for single-field occupancy