Weber Pipe line

Pipe lines (rigid)
Brand Tecnova, Weber ,Graewe
Model max 32 mm (63)
Year 2002

Material Polyolefins
Inserts for pipe Ø (a,b,c,..) (mm)
12x2,75, 16x1,25, 19x1.0, 20x1.5, 19,5x1,5, 32x1, 32x1,6, 28x1,15
Extrudertype (a,b,c) (1=single screw 2=dubbel screw) 1
Venting point (a,b,c) (0=no 1=yes) 1
Motor (kW) 22
Screw (a,b,c) (mm) 45
Screw (a,b,c) L/D 37
Calibration Tank Length (mm) 6m Sandern twin track
Saw (brand) Reinhard servo cutter

Notes complete line description
Machine Type : pe/pp small diameter pipe extrusion line
Make : Tecnova,Weber ,Sandern ,Graewe ,Reinhard
Year : 2000/2005 Our Reference : pipe 5-32 mm
Line consists of the following machines
Extruder: Tecnova 45/37 single screw extruder 45 mm screw 37D 22.5 kw drive
Vented extruder with less then 3000 hours
Die and tooling: Twin line Make Weber/GFK Model POG 25/2
Tooling Bushes 12.7,16.5, 16.8, 20.0, 34 mm
Tooling Pins 7.1, 13.7, 18, 31.2 mm Actually produced on this line was:
Pipes: 12x2,75, 16x1,25, 19x1,0 , 20x1,5 / 19,5x1,5, 32x1, 32x1,6, 28x1,15
Vacuum calibration tank Twin line Make Sandern Model 63/2/6
Max diameter 63 mm Length 6 meters Two chamber vacuum system
Sections 1 meter and 5 meters Tank in stainless steel
Left and right tank each have separate controls
Forward backward movement integrated into machine
Haul off Twin Make Graewe Model DBA63 Contact length 1200 mm
Max diameter 63 mm Servo drives Left and right each have separate controls
Servo Cutter Pre heating oven to make better cutting possible
Make Reinhard Collection table Home made by pipe producer suitable for twin track
All equipment in very good condition and complete