Weber KSF

Wide belt sanding machine with 2 longitudinal sanding units and 1 planetary head station,
suitable for fine sanding and intermediate lacquer sanding / cross sanding

Equipped with:
1x planetary head station, 2 kW, frequency-controlled
with 6 units
Trimming: sanding heads with quick-change device
Frequency-controlled speed, max. 300 - 1280 rpm on the tool with electric height adjustment
can be pulled out via drawer function, with individual control for extraction slide

1x combination unit (CBF), 20 kW, frequency-controlled approx. 1.6 - 16 m/sec.
Grooved hard rubber roller, approx. 60 Shore
Diameter 130 mm
Sanding belt dimensions 1370 x 2620 mm
Program-controlled infeed of the contact roller
Program-controlled crowning compensation
one cross-running lamella belt with separate 3.0 kW drive
ISA link pressure beam system with 22 mm workpiece detection and 22 mm pressure piece width
Workpiece-controlled oscillating sanding belt blow-out

1x combination unit (CBF), 20 kW, frequency-controlled approx. 2 - 20 m/sec.
One rubberized drive roller
Sanding belt dimensions 1370 x 2620 mm
Workpiece-controlled oscillating sanding belt blow-off device
Individual control for suction slide a cross-running lamella belt with separate. drive 3,0 mkW
ISA link pressure beam system with 22 mm workpiece detection and 22 mm pressure piece width

1x workpiece blow-out device with Weber ES systems Energy-saving workpiece-controlled parts cleaning

1x WANDRES-Micro-Cleaning (double brush version)
Power Sword Brush with integrated micro-moistening of the linear brush
(for optimum paint dedusting)
with the additional function of conveyor belt cleaning
with individual control for suction slide

Infinitely variable feed rate, approx. 4 - 20 m/min.
Conveyor belt with vacuum, vacuum blower 4 kW

Control system:
Siemens MP 377 Multi Panel 12” operating terminal in one
swivel console,
Graphic operator guidance
Program memory for 300 programs
Setting of all parameters via program
Weber i-Touch operation

Operating side and sanding belt change side on the right in throughfeed direction
Space requirement for belt change approx. 1800 mm
Compressed air requirement: approx. 6 bar
Total connected load approx. 69 kW
Weight approx. 4500 kg