VK26 M Debarking machine

Valonkone VK26M line ( year 1974 line ) with sliding table
A., VK26M ( year 1974 line ) with sliding table :
• main machine
• infeeding table ( driven )
• outfeeding table
• electric cabinet

Including infeed and outfeed table , workshop inspected *
• debarking capacity: 10cm - 61cm diameter
• 4 abrader knives
• 4 cutting knives
• speed of the rotor =235rpm / min
• Rotor öppning=65cm
• 30 KW motor, rpm 1500/ min
• speed: 17-42m / min
• 3m or longer ( timber length )

Dimension ( without in feed and out feed table )
L= 9130mm

B., VK26M ( year 1974 line ) with motorized out feeding table :
• main machine
• infeeding table ( driven )
• outfeeding table
• electric cabinet

Including infeed and outfeed table , workshop inspected *
• debarking capacity: 10cm - 61cm diameter
• 4 abrader knives
• 4 cutting knives
• speed of the rotor =235rpm / min
• Rotor öppning=65cm
• 30 KW motor, rpm 1500/ min
• speed: 17-42m / min
• 3m or longer ( timber length )

Dimension ( without in feed and out feed table )
L= 9840mm

Infeeding table : 3540mm x 1000mm x 1900
main VK26M machine : 2530mm x 2200mm x 2350
Outfeeding table ( slide cradle ) : 3060mm x 1000mm x 1300
Outfeeding table ( motorized table ) : 3170mm x 1000mm x 1300

RENOVATION:
Pos 1 1 Salary: Machine disassembly,washing,sandblasting,Priming and varnishing, repair, assembly
Pos 2 1 Material knife axles on rotor new bearings and sealing ( if necessary )
Pos 3 5 Other material: pieces V-belts for rotor drive
Pos 4 1 gear oil
Pos 5 1 Material: abrasive + colours
Pos 6 4 Valonkone piece scraper knife
Pos 7 4 Valonkone Piece Pre shedder
Pos 8 1 Electric cabinet :
with Delta 3 phase start for 30 kw main motor
with Delta 3 phase start for 11 kw gearing motor
with start for 4 kw gearing motor infeeding
with start for 4 kw gearing motor outfeeding
Main starter
Stop emergency