Victor Engine Lathe 1200 rpm 2980 T

VICTOR 2980 T

29" X 80" Victor Gap Bed Engine Lathe
Swing 29"
Swing Over Cross Slide 20.5"
Centers 80"
Spindle Bore 4"
RPM 1,200 RPM
Power 15 hp
Dimensions 140" Long. X 72" Wide X 72" High
Weight 9,250 Lbs.

Swing Over Bed Ways 29-1/8"
Swing Over Cross Slide 20-1/2"
Swing In Gap 37-25/32"
Cross Slide Travel 16-1/4"
Compound Travel 8-1/4"
Bed Width 16-1/2"
Center Distance 80"
Spindle Hole 4.13"
Spindle Speeds 12 15 To 1,200 Rpm's
Spindle Nose D1-11
Chuck Size Front 20" 4-Jaw
Floor Space 140" X 54"
Feeds Cross .0004 To .0118"/ REV
Feeds Long .0012" TO .0287" / REV
Threads Inch (45) 2 To 56 TPI
Threads Metric (31) .05 To 13 MM
D.P. 2 T 160 T.P.I.
Module .5 To 40
Lead Screw Diameter And Threads 1.97" / 2 TPI
Tail Stock Quill Diameter 4.1"
Tail Stock Quill Travel 7"
Tail Stock Taper #5 Morse
Main Motor 20 Hp.
Floor Space 140" Long. X 72" Wide X 72" High
Machine Weight 9,250 Lbs.
Coolant Pan Yes
Harden & Ground Ways Yes
FEATURES:
High precision hardened and ground spindle
Hardened and precision ground induction bedways with high tension mechanize casting iron
The spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing)
4-1/8" large spindle bore with D1-11 camlock spindle nose
Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake
All running parts are lubricated by a pressure pump in gearbox
Sliding, surfacing, and screw-cutting motions are fully interlocked in the apron
A cone-clutch device in the apron to prevent overload
Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation
4-way power rapid traverse
Ampere meter for power consumption monitoring
Jog button for easy spindle speed changes
20 HP main motor
Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor. The best in its class to handle utmost demanding work.