Union KC 150 150 mm 3000 min-1

UNION KC 150 2006

control: HEIDENHAIN iTNC 530
X-Axis, lateral movement table 4.000 mm
Y-Axis, vertical movement spindle unit 2.500 mm
Z-Axis, longitudinal movement column 1.500 mm
W-Axis, movement quill 750 mm
B-Axis, rotary movement table 360 Grad
B-Axis, number of positions 360.000 x 0,001°
machining unit:
Ø quill 150 mm
Fixed spindle nosing, length 370 mm
Fixed spindle nosing, diameter 280 mm
Shortest distance, spindel nose to mid of table 850 mm
Lowest position above table surface 0 mm
Spindle taper (short taper acc. to DIN 69871) ISO 50
Spindle power S1 (100%) / S6 (60%) 37/46 Nm
Max. torque at spindle 2.179 Nm
Spindle speed, continuously variable 5-3.000 min-1
NC-Rotary Table:
Clamping surface 2.000 x 2.500 kg
Center hole in table 100 mm H6
table load (max.150mm outside table center) 20.000 kg
T-slot width 28 mm
T-slot distance 160 mm
Number of positions 360.000 x 0,001°
max. travel speed:
Max. Feed range for X-, Y-, Z- and W-Axis 15.000 mm/min
Rapid traverse for all linear Axes 15.000 mm/min
B-Axis 3 m/min
data for electrical installation:
Operating voltage 3-400/230 V
Frequency 50 Hz
Power requirement 90 kVA