Umut High Production Stretch Film Rewinder

High-production fractionating rewinder for Stretch film.

Construction Features
Main control panel controlled by PLC.
Touch control panel with digital display for control:
Self-diagnosis and alarm display program.
Manual operation selection.
Rewind cycle settings.

Manual side control system for loading jumbo coils.
Photocell control system to prevent lateral tears or rips in jumbo reels.
Photocell control system for process programming against operator error.
Automatic detection of the end of the feed roll by photocell with
automatic stop of the machine when the last roll is rewound.
Core magazine capacity: approx. 100 cores (50 mm diameter).
Pairs of mandrels with diameters of 38, 50 or 76 mm.
Maximum feed roll width: 650 mm.
Maximum feed roll diameter: 550 mm.
Feed roller film thickness: 8 to 26 microns (Food and Industry)
The maximum standard diameter of the rewound roll is 240 mm,
with automatic changeover at the end of the rewind, slitting and rewinding cycle.
Inner core diameter: 38-50-76 mm
Master roll take-up: Pneumatic compression
Compressed air supply: 100-150 NL/min 6 bar
Power supply: 380 V – 3 phases + N + E
Power consumption: 4 kW
Average speed of 700 m/min; this speed can be adjusted according to
the quality and thickness of the stretch film, up to a maximum of 1000 m/min.
Machine speed varies depending on the winding gauge, thickness,
and quality of the product being wound.