Stefani EVOLUTION SB ONE

Single Edgebanders
Short Description :
Type of edging Thin edge, Thick edge
Gluing System EVA Hotmelt, PUR
Premilling Unit
Corner Rounding Unit
Grooving Unit
Max feed speed 40 m/min
Maximum panel thickness 60 mm
Operating Units 15 nr

Long Description :
Subfamily Single Edgebanders
Subfamily 2 Softforming
Min. panel height 10 mm
Max. panel height 60 mm
Min. edge thickness 0.3 mm
Max. edge thickness 3 mm
Max. forward feed speed 40 m/min

Top pressure
Pressure with rubber belt
Infeed panel alignment system
No. Panel Sizing / Milling units 3

1
Unit miller hogger
Constructor model AS3
automatic timed intervention
motor power 4 KW
r.p.m. 6000 RPM

2
Unit double chipper, top and bottom
Constructor model DT3
Motor power 5.6 KW
r.p.m. 6000 RPM

3
Unit pre-milling unit
Constructor model COMBI
automatic timed intervention
motor power 4 KW
r.p.m. 6000 RPM
Lamps to preheat the side of the panel
Edge coil magazine
no. positions 6

Gluing system
glue pot for EVA hot melt glue
glue pot for PUR glue
premelter for EVA hot melt glue
premelter forPUR glue
premelter for PUR glue
Nordson MC series 12
Roller set to press the edge
no. pressure roller 8
with positioning by NC
Roller set to press the edge on softformed profiles with positioning by NC
No. Edge Processing Units 11

1
Processing Unit end trimming
Constructor model YU/SP
no. motors 2
with positioning by NC
motor power 0.55 KW
r.p.m. 12000 RPM

2
Processing Unit top and bottom rough trimming
Constructor model R
no. motors 1
motor power 1 KW
r.p.m. 18000 RPM

3
Processing Unit fine trimming to trim and round
Constructor model RSU 2P PN
no. motors 2
with positioning by NC
motor power 1 KW
r.p.m. 12000 RPM

4
Processing Unit Corner rounding
Constructor model C1C2 2P
no. motors 4
motor power 0.35 KW
r.p.m. 12000 RPM

5
Processing Unit milling hogging
Constructor model U-03
no. motors 1
motor power 5.5 KW
r.p.m. 12000 RPM

6
Processing Unit edge scraping
Constructor model RCS

7
Processing Unit edge scraping
Constructor model RCS

8
Processing Unit belt sanding
no. motors 1

9
Processing Unit buffing
no. motors 1
motor power 0.29 KW
r.p.m. 1800 RPM

10
Processing Unit buffing
motor power 0.29 KW
r.p.m. 1800 RPM

11
Processing Unit buffing
no. motors 2
motor power 0.3 KW
r.p.m. 1500 RPM
Spray unit
Units fitted on overtables
Control system TSIN
Total installed power 65 KW