Standard Modern Engine Lathe 2000 1340

STANDARD MODERN 1340

Spindle Speed RPM 2000
Main Motor 3
Swing 13 inches
Centers 40 inches
Spindle Bore 1.375 inches
Power 3 horsepower
RPM 2000
Swing Over Cross Slide 7.75 inches

Machine
Swing Over Bed: 13”
Swing Over Cross-Slide: 7.75”
Distance Between Centers: 40”
Main Drive Motor: 3 HP
Bar Capacity: 1.375”

Headstock
Spindle Speed Ranges: 12
Speed Range: 40 – 2,000 RPM
Spindle Nose Camlock: D1-4
Spindle Hole: 1.375”
Spindle Center: 3 MT

Feedbox
Number of Feed Changes: 54 (in/mm)
Number of Thread Changes: 54 (in/mm)
Inch Feed Range, Longitudinal: .001 - .062 IPR
Inch Feed Range, Cross: .0005 - .031 IPR
Inch Thread Range: 4- 224 TPI
Metric Feed Range, Longitudinal: .031 – 1.74 mm/rev
Metric Feed Range, Cross: .015 - .87 mm/rev
Metric Thread Range: .125 – 7 mm lead
Carriage Cross-Slide
Cross-Slide Travel: 7"
Compound Travel: 3.25”

Tailstock
Tailstock Spindle Diameter: 1-56”
Tailstock Spindle Travel: 4"
Tailstock Spindle Taper: 3 MT

Equipped With
3-Jaw Chuck
4-Jaw Chuck
Quick Change Tool Post with Holders
Lathe Centers
Jacobs Tailstock Drill Chucks