Menu

Speedline MPM Momentum

Ref : 2660920-9-CP
Condition : Used
Manufacturer : Speedline
Model : MPM Momentum
Year(s) : 2012
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Vintage : JUN 2012

Specifications
Momentum was designed and built to be a
no-nonsense production machine.
Cost-efficient and featuring a modest footprint,
it grows with the user; innovative patented features can
be added on or retrofitted as needed as
the user’s throughput demands grow.
There are five different versions of the Momentum available,
based on needed cycle time speed, or capacity.
Numerous patents protect the Momentum,
which incorporates tried and true systems and
features from other successful MPM printers that
were designed prior to Momentum (and are still in use today).
Momentum’s alignment repeatability is
+/-12.5 microns @ 6 sigma, Cpk > 2.
Its 6 sigma capability is designed in and independently verified.
Wet print accuracy is 20 microns @ 6 sigma, Cpk > 2.
Tighter performance tolerances mean higher repeatability with
fewer defects.

BOARD HANDLING
Maximum Board Size (X x Y):
609.6 mm x 508 mm (24” x 20”)

Staging Mode - Momentum Elite:
457 mm x 508 mm (18” x 20”)

Minimum Board Size (X x Y):
50.8 mm x 50.8 mm (2” x 2”)

Board Thickness:
0.2mm (0.008") to 5.0mm
(0.20”), up to 6.0 mm
(0.24”) without top clamp foils

Maximum Board Weight:
4.5 kg (9.92 lbs)

Board Edge Clearance:
3.0 mm (0.118")

Underside Clearance:
12.7 mm (0.5") standard
Configurable for 25.4 mm (1.0”)

Board Hold-Down Fixed top clamps, centernest vacuum
Optional EdgeLoc

Board Support Methods:
Magnetic pins,Optional Gel-Flex, vacuum pins,
support blocks, patented auto-tooling or Grid-Lok

PRINT PARAMETERS
Maximum Print Area (X x Y): 609.6 mm x 508 mm (24" x 20")
Print Gap (Snap-off): 0 mm to 6.35 mm (0" to 0.25")
Print Speed Up to 305 mm/sec (12.0"/sec)
Print Force 0 to 20 kg (0 lb to 44 lbs)
Stencil Frame Size: 737 mm x 737 mm (29" x 29")
Adapters available for smaller sizes

VISION
Fiducial Types:
Standard shape fiducials(see SMEMA standards),
pad/aperture

Camera System:
Single digital camera - MPM patented look up/down vision

PERFORMANCE
Total System Alignment: ±12.5 microns

Accuracy and Repeatability:
±0.0005") at 6 sigma, Cpk of greater than or equal to 2.0*

Qualification is performed using production environment
process variables; print speed, table lift and camera
movement are included in the capability figure.
Wet Print Deposit ±20 microns

Accuracy and Repeatability (±0.0008") at 6 sigma,
Cpk of greater than or equal to 2.0*

Based upon actual wet printing with positional accuracy
and repeatability verified by a 3rd party measurement
system.

Cycle Time
Momentum 11 seconds standard
Momentum+ 9 seconds standard
Momentum HiE 7.5 seconds standard
Momentum Elite 6 seconds standard

FACILITIES
Power Requirements
200 to 240 VAC (±10%)
single phase @
50/60Hz,
15 A

Air Supply Requirements 100 psi at 4 cfm
(standard run mode) to 18cfm
(vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5L/s),
12.7 mm (0.5”) diameterline


Machine Weight
Momentum, Momentum+ Momentum HiE: 862 kg (1900 lbs)
Momentum Elite: 899 kg (1982 lbs)

Crated Weight
Momentum, Momentum+ & Momentum HiE: 1155.5 kg (2547 lbs)
Momentum Elite: 1192.5 kg (2629 lbs)

Other machines similar to Speedline MPM Momentum

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2016
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2009
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2011
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2013