Southwestern Industries Vertical 2200 Rpm SOUTHWESTERN INDUSTRIES TRAK TRL 1745P

SOUTHWESTERN INDUSTRIES TRAK TRL 1745P
Year 1997


Height of Centers 8.875 inches
Distance Between Centers 45 inches
Swing over Bed 17.6875 inches
Swing over Saddle Wings 16.125 inches
Swing Over Cross Slide 10.47 inches
Cross Slide Travel 9
Tool Section Max 1"
Coolant 4 Gallon
Gear Box 2.5 Gallon
Bed Width 12 inches
Bed Height 11.5 inches
Spindle Nose CAMLOCK D1-6
Spindle Through Hole 2 inches
Taper Reduction Sleeve MT-4
Spindle Diameter/ Front Bearing 3.15
Number of Spindle Speeds 12
Spindle Speed Range 40-2200 Rpm
Spindle Taper 1°29’15”
Quill Travel 6.25 inches
Quill Diameter 2.3125 inches
Quill Taper Hole MT-4
Main Motor 7.5 HP
Coolant Pump Motor 1/8 HP
Equipped With
Equipped With:
- ProtoTRAK LX2 Control Hardware:
* 2 -axis CNC, 2-axis DRO
* D.C. Servo Motors rated at 280 in-oz continuous torque for X and 560 in-oz for the Z axis.
* Precision ground ballscrews in the carriage and cross-slide to ensure smooth accurate contours without backlash.
* Feedrate override of programmed feedrate and rapid.
* Polycarbonate sealed membrane and gasket sealed control enclosure to lock out contamination.
* RS232 port for interface to computers.
* Modular design simplifies service and maximizes uptime.
* Double floppy drive – for system disk and program storage.
- 3 Jaw Chuck
- With 2 Steady Rest