SCM Unisand K 1350 M2

Suitable for lacquer sanding, veneer cut, light calibration cut
Sanding width 1350 mm
Working height 900 mm
Min./max. working thickness (fixed worktable)
4 – 200 mm. Worktable with fixed height (movable head). For this feature the machine can also work in a automatic production line.
Sanding belt drive with electronic, wear-free brake
Safe workpiece guidance by rubberized, spring-guided pressure rollers before and after workpiece recognition or before and after the grinding unit.
EPICS electronic sectional pad – electronically controlled, segmented pressure beam system
– 46 sections
– automatic adaptation of the segments to the workpiece surface.

Sanding units:
1. TA cross belt sanding unit
Electrically controlled link sanding pad
Drive power 15 kW
Abrasive belt size: 6.550 x 150 mm
Sanding belt speed 2 – 20 m / s
Wide chevron tape
Oscillating blowers for the cleaning of the sanding belts

2. Contact roller, soft – rubber version
R-320 roller with 320 mm diameter guarantees a very high finishing quality on veneered and painted panels.
Spirally grooved roller.
Shore 40 SH.
Drive power 15kW.
Sanding belt speed 2 – 20 m / s
Sanding belt dimensions: 2620 x 1370 mm.
Oscillating blowers for the cleaning of the sanding belts

3. PSE superfinishing pad unit
The unit has an EPICS electronic pad with a extra-large contact surface and a chevron belt.
Ideal for superfinishing painted or veneered panels (PSE version).
Drive power 15kW
Sanding belt dimensions: 2620 x 1370 mm
Sanding belt speed 2 – 19 m / s
Wide chevron tape
Oscillating blowers for the cleaning of the sanding belts
Pneumatic belt tensioning, intermittent belt-emitting device, automatic infrared band control.
Panel cleanic GS brush unit

Diameter: 200 mm.
Drive power: 1.5 kW, rpm 1400
Dedusting system at the outlet

Workpiece cleaning by double oscillating blowing rod.
Conveyor belt with vacuum
Vacuum clamping device
Feed rate 3,5 – 18 m/min
Feed motor 4 kW
Entry and exit table extension for long workpieces
Electric cabinet with operating terminal
Operating and program system Hydra PC.
LCD – color screen, interactive graphical operation of the machine.
Programming the segmented pressure beam system.
Incl. noise source, workpiece flow and feed rate display, input of workpiece thickness in the terminal.
Pmax 8 bar
Operating voltage 400 V / 50 Hz
Total connection value approx. 57 kW
Wight 4450 kg